Bearings In Rotor Mixing Chamber Improved{6635}
Usage:
RM-350 (5FK) Reclaimer Mixer, SM-350 (1RM) Soil Stabilizer
Description of Change: The bearings in the rotor mixing chamber disk were improved to increase service life.
Adaptable To: The new 121-0158 Bearings are effective with RM-350 (5FK82-Up) and SM-350 (1RM58-Up). The new bearings are adaptable to previous machines if the parts indicated in the Illustration are also replaced.
Rotor Mixing Chamber. (1) 1K-8061 Thrust Washer. (2) 121-0154 Pivot. (3) 121-0158 Bearing. (4) 121-0157 Disk.
Caterpillar Information System:
1995/10/23 Improved Wheel Bearing Cone Anti-Rotation System Prevents Wheel Bearing Cones From Rotating On The Axle Housing{4208,4234}
1995/10/23 Rear Edge Of Clam Assembly May Wear In Abrasive Applications{6104,6518}
1995/10/23 Powering and Interfacing to Agricultural Implement Electronic Systems{6800,7300,7332,1408,7490,6331,6304,6330}
1995/10/23 Incident Reports And Parts Involved{0336,0337}
1995/10/16 Adding A Shim Pack To Bottom Hitch Improves Bolt Retention{7100}
1995/10/16 A Change Has Been Made To The 9X-3136 Basic Heater Group To Reduce Leaks{7304}
1995/10/16 Field Repair 0f Cracked 2G-9774 Guard Assembly (Right Front Fender){7252}
1995/10/16 New Suspension Cylinder Rod Seals Reduce Leakage In All Applications{7201,7213}
1995/10/16 New Method Used To Install Fabric Covers For Rear Suspension Cylinders{7201}
1995/10/16 New Hose Assembly in The 6G-7858 Hoist Oil Lines Group Resists Erosion Caused By Oil Flow{5057}
1995/10/16 Changes Have Been Made To Improve Performance And Serviceability Of The Motor Grader Front Wheel Drive Groups{3278,4351,4352}
1995/10/16 Seat Tethers Information and Locations{7324}
1995/10/23 New Hose Retention Prevents Chafing Of Vibratory And Propel System Hoses{5057,6604}
1995/10/23 New Blade Cylinder Guards Protect Fitting From Damage In Trenching Applications{5102,5057}
1995/10/23 Dynamometer Testing of Electronic Engines{1913}
1995/10/30 Improvements to Service Information System (SIS) 2.0 Update{0374,0375,0376}
1995/10/30 Removal Procedure For Sprocket Bearings Increases Service Life Of Final Drive Hub{4054}
1995/10/30 Work Light Improvements To Increase Blade Visibility{1429}
1995/10/30 New ICM Transmission Control (Actual Gear Switch) Is Available{3168}
1995/10/30 New Follower Assembly Used In Lubrication Pump Group{7540}
1995/10/30 New Parts Service Transmission Sleeve Bearing Does Not Require Sizing{3160}
1995/10/30 New Brake Cooler Tubes For The 8W-9884 Oil Cooler Lines Group Reduce Stress{4257}
1995/10/30 New Backup Lamp Group Resists Shock and Vibration{1428}
1995/10/30 Proper Adjustment Of Medium Wheel Loader F-Series II Type Cab Door Bumper{7301,7308}