1995/10/30 Caterpillar

Proper Adjustment Of Medium Wheel Loader F-Series II Type Cab Door Bumper{7301,7308}

Usage:

938F (1KM, 2RM, 8SM, 7SN),
950F Series II (5SK, 8TK, 4DJ, 2LM),
960F (9ZJ, 4CL, 6XL, 1YM),
966F Series II (1SL, 9YJ, 8BG),
970F (7SK, 9JK, 7PL) Wheel Loaders;
IT38F (6FN, 5DR) Integrated Toolcarriers.

Some medium wheel loader F-Series II type cabs have experienced door rattling and/or damage. The following adjustment procedure to engage the cab door with the conical bumper and mounting bracket should be used to rectify the problem.

Procedure To Adjust Cab Door

1. Loosen the 5C-7261 Jam Nut (2) on the 4E-1384 Conical Bumper (1).

2. Adjust the bumper all the way into the mounting bracket (B).

3. Place the door/window in the second catch/second click of the hold-open latch (A).

4. Adjust the bumper out until it firmly contacts the door/window. Tighten the jam nut in this position.

NOTE: If the bumper is compressed more than 1 mm (.04 in), replace the bumper.

Illustration 1. Cab view from rear of machine.

Caterpillar Information System:

1995/10/30 New Backup Lamp Group Resists Shock and Vibration{1428}

1995/10/30 New Brake Cooler Tubes For The 8W-9884 Oil Cooler Lines Group Reduce Stress{4257}

1995/10/30 New Parts Service Transmission Sleeve Bearing Does Not Require Sizing{3160}

1995/10/30 New Follower Assembly Used In Lubrication Pump Group{7540}

1995/10/30 New ICM Transmission Control (Actual Gear Switch) Is Available{3168}

1995/10/30 Work Light Improvements To Increase Blade Visibility{1429}

1995/10/30 Removal Procedure For Sprocket Bearings Increases Service Life Of Final Drive Hub{4054}

1995/10/30 Improvements to Service Information System (SIS) 2.0 Update{0374,0375,0376}

1995/10/23 Dynamometer Testing of Electronic Engines{1913}

1995/10/23 New Blade Cylinder Guards Protect Fitting From Damage In Trenching Applications{5102,5057}

1995/10/23 New Hose Retention Prevents Chafing Of Vibratory And Propel System Hoses{5057,6604}

1995/10/23 Bearings In Rotor Mixing Chamber Improved{6635}

1995/10/30 Product Support For The Caterpillar Fire Suppression System With Automatic Actuation{7401}

1995/10/30 New Sleeve Bearing Used In Camshaft Idler Gear Assembly In Rear Gear Groups{1206}

1995/11/06 Improved Fan Drive Groups and Belt Tightener Groups Need Scheduled Periodic Lubrication {1359}

1995/11/06 Retrofit of EPTC II To Earlier Machines With ICM Transmissions {3168,3150}

1995/11/06 New Duo-Cone Seal Retainer And Backing Plate Reduces Oil Leaks In The Service And Parking Brake Group {4251,7561}

1995/11/06 New Control Group (Timer) Is Available For Use With The Lincoln Lube System {7540}

1995/11/06 Dealer Installed Air Inlet Heater Starting Aid Available {1058}

1995/11/06 New O-Ring Seal Used On Unit Injector Tip Withstands High Temperatures {1290}

1995/11/13 The Technical Information Feedback System Form Is Available In Electronic Mail {0374}

1995/11/13 Quick Couplers Available For Return Line Bypass/Power Beyond Applications {5057}

1995/11/13 Improved Capacity Evaporator Core Increases Evaporative Capacity {7320,7343}

1995/11/13 New Key Start Switch Increases Reliability {1416}