New Guard And Skirting Added To Cutter Box To Protect Tail Pulley And Lower Portion Of First Stage Conveyor {6635}
Usage:
PM-565 (3TK) Cold Planers
Description of Change: A new plate assembly is now used to protect the tail pulley and the lower portion of the first stage conveyor. Also, two new rubber deflectors are used at the outside corners of the door group.
Adaptable To: The new 110-0558 Plate Assembly and new 110-0556 Deflectors are effective with PM-565 (3TK68) Cold Planer. The new parts are a part of the 087-0121 Door Group in the chamber group. The new parts are adaptable to PM-565 (3TK1-67). The illustration and chart shows the location and parts list to adapt the new plate assembly and deflectors to existing machines.
See chart for identification of parts.
Caterpillar Information System:
1994/02/28 6G-2943 Circle Assembly Can Be Reinforced To Improve Service Life In Severe Applications {6154,6157}
1994/02/28 New Resistor Provides Higher Intermediate Speed of Air Conditioner Fan {7320,7337}
1994/02/28 Implement Status Switch Harness Modifications {1408,7490}
1994/02/28 Fuel Sump Tank Drain Valve Protection Available {1279}
1994/02/28 New Shroud Assembly Now Available for Power Take Off {1165}
1994/02/21 Servicing Lighted Rocker Switches {1435}
1994/02/21 Performance Of Rotor Axle Seal Depends On Correct Shimming Procedure {5634}
1994/02/21 Direction Of Drum Rotation Can Be Changed; Chain Case Hub Must Be Shimmed Correctly {5634}
1994/02/21 Usage of Transmission Hand Controls {3168}
1994/02/21 Improved Screen Used In The Brake Oil Cooler {1366,4295}
1994/02/21 New Suspension Cylinder Rod Seals For Arctic Region Applications {7201,7213}
1994/02/21 Replaceable Sleeve Bearings Can Be Installed In The Circle Assembly And Moldboard Rail Brackets {6154,6157}
1994/02/28 Improved Lubrication Of Attachment Coupler Bushing {5133}
1994/02/28 Soldering Iron Available For Field Use {0709,1400}
1994/02/28 New Retaining Compound Is Available {0649}
1994/02/28 A New Gauge Group Is Now Used To Prevent Fogging {7450}
1994/02/28 Identification Plate For Starting/Charging Diagnostic Connector {1450,7557,7569}
1994/02/28 New Turbocharger Models Have Left-Hand Threads On Compressor Nut And Turbine Shaft {1053,1052}
1994/02/28 Remove Internal Components From 4P-8454 Cover Assembly {1309}
1994/02/28 Non-Counterbored Valve Guides Used To Reduce The Amount Of Oil That Flows Down Valve Stem {1104}
1994/02/28 Improved 1R-0716 Oil Filter Should Be Used On 3500 Engines {1318}
1994/03/07 Circle Drive Unit Cover Can Be Modified To Prevent Oil Loss Through The Vent{5201,5209}
1994/03/07 Boss Needed To Mount Replaced Fuel Tank{1273}
1994/03/07 Front Axle Toe-In Adjustment Procedure{4313}