Soldering Iron Available For Field Use {0709,1400}
Usage:
Reference: Tool Operating Manual, Form NEHS0601
A soldering iron is now available for field use. See Tool Operating Manual, NEHS0601 for information on the 9U-7560 Soldering Iron Group. Included in this group are a 9U-7561 Soldering Iron, 9U-7562 Solder, and a 6V-3073 Case. The Tool Operating Manual recommends a 4C-9024 Battery Pack Group be used to power the soldering iron. The battery pack will provide up to 20 hours of use when fully charged. See the Tool Operating Manual for additional operating instructions and tips on proper soldering procedures.
Caterpillar Information System:
1994/02/28 Improved Lubrication Of Attachment Coupler Bushing {5133}
1994/02/28 New Guard And Skirting Added To Cutter Box To Protect Tail Pulley And Lower Portion Of First Stage Conveyor {6635}
1994/02/28 6G-2943 Circle Assembly Can Be Reinforced To Improve Service Life In Severe Applications {6154,6157}
1994/02/28 New Resistor Provides Higher Intermediate Speed of Air Conditioner Fan {7320,7337}
1994/02/28 Implement Status Switch Harness Modifications {1408,7490}
1994/02/28 Fuel Sump Tank Drain Valve Protection Available {1279}
1994/02/28 New Shroud Assembly Now Available for Power Take Off {1165}
1994/02/21 Servicing Lighted Rocker Switches {1435}
1994/02/21 Performance Of Rotor Axle Seal Depends On Correct Shimming Procedure {5634}
1994/02/21 Direction Of Drum Rotation Can Be Changed; Chain Case Hub Must Be Shimmed Correctly {5634}
1994/02/21 Usage of Transmission Hand Controls {3168}
1994/02/21 Improved Screen Used In The Brake Oil Cooler {1366,4295}
1994/02/28 New Retaining Compound Is Available {0649}
1994/02/28 A New Gauge Group Is Now Used To Prevent Fogging {7450}
1994/02/28 Identification Plate For Starting/Charging Diagnostic Connector {1450,7557,7569}
1994/02/28 New Turbocharger Models Have Left-Hand Threads On Compressor Nut And Turbine Shaft {1053,1052}
1994/02/28 Remove Internal Components From 4P-8454 Cover Assembly {1309}
1994/02/28 Non-Counterbored Valve Guides Used To Reduce The Amount Of Oil That Flows Down Valve Stem {1104}
1994/02/28 Improved 1R-0716 Oil Filter Should Be Used On 3500 Engines {1318}
1994/03/07 Circle Drive Unit Cover Can Be Modified To Prevent Oil Loss Through The Vent{5201,5209}
1994/03/07 Boss Needed To Mount Replaced Fuel Tank{1273}
1994/03/07 Front Axle Toe-In Adjustment Procedure{4313}
1994/03/07 New Parts Service Thrust Washers, Planet Gears And Sun Gear Improve Final Drive Service Life {4055,4051}
1994/03/07 New Rubber Mounting For Main Power Relay At Instrument Panel{1423}