12 And 24 Volt DC Work Lights Are Available{0600}
Usage:
New work lights that operate on 12 or 24 volts DC are now available. The light assembly consists of a "stubby" flourescent work light with a clear plastic outside tube that has the "CAT" logo in black. The power cord is made of SJOW-A low temperature, oil resistant, two conductor 18 gauge cord material and is 9 m (30 ft) long.
The assembly is equipped with either a lighter or Britex plug. Each work light has a steel hook for supporting it while in use. Additional accessories are available. See Section 115 of the Shop Products Guide.
The part number, voltage and type of plug are given in the following chart.
Caterpillar Information System:
1994/02/07 Longer Grease Hose Assembly Used In Fan Belt Tightener Groups{1358,1359}
1994/02/07 New Piston Body Has Improved Bonding Between Iron Band And Aluminum Body{1214}
1994/02/07 New Magnetic Drain Plug For Vibratory Bearing Reservoir Provides Early Warning Of Wear{6606}
1994/02/07 Suspension Control Valve Mounting Group Bolt Torque Specification Is Reduced To Prevent Control Valve Sticking And Scuffing{7214}
1994/02/07 Sump Guard Assembly (Crankcase Guard) Is Deeper And Has Thicker Material To Improve Clearance And Resist Bending{7151}
1994/02/07 New Wheel Bearing Adjustment Procedures{4208}
1994/02/07 New Pinion And Seal Assembly Replaces The Former Carbon Seal{3280,3254,3250}
1994/02/07 Cover Assembly Protect Hydraulic Tank Sight Glasses{5056}
1994/02/07 New Radio Mount Available For B Series Backhoe Loaders Equipped With Air Conditioning{7338}
1994/02/07 New Radiator Hose Clamp Allows Easier Tightening{1380}
1994/02/07 Lock Valve Group With A Relief For Right Blade Lift Cylinder Is Available On Motor Graders{5102,5100}
1994/02/07 New Hose Clamps Provide Improved Clamping{1058}
1994/02/07 New Turbocharger Groups And New Turbocharger Cartridge Groups Have Improved Thrust Bearing And Turbine Ring Seal{1052,1053}
1994/02/07 Cylinder Head Gaskets Improved To Provide Better Fire Ring Retention{1124}
1994/02/07 Fuel Injection Pump Improvements{1251}
1994/02/14 Multipurpose Tractor Oil (MTO) Is Usable In All Challenger Implement Hydraulic And Combined Implement And Steering Hydraulic Systems{5068,5050,5450}
1994/02/14 Air-To-Air Aftercooler Assembly Mounting Brackets Improved{1063}
1994/02/14 Engine Coolant Temperature Gauge May Run High{7400,7453}
1994/02/14 Thicker Retaining Ring Is Available For Use With CAT® GraderBit Assemblies{6151,6150}
1994/02/14 Publications Available For Off Highway Truck Retrofits{1290,1631,1900,3100,3150}
1994/02/14 Improved Wheel Bearing Cone Anti-Rotation System Prevents Wheel Bearing Cones From Rotating On The Axle Housing{4208,4234}
1994/02/14 Shorter Stud Used To Improve Sealing Between The Radiator Cap Assembly And Filler Adapter{1382,1353}
1994/02/14 New Universal Joint Groups Have Improved Sealing{3251,3253}
1994/02/14 Improved Mounting Method For Hydraulic Quick Hitch Pins{5133}