1993/10/18 Caterpillar

24V Fog Lamp Now Available {1400}

Usage:

All 24V Machines

A sealed beam fog lamp is now available for 24V machines. The fog lamp size is a PAR46, which is 146 mm (5.75 in) in diameter. The 110-3242 Lamp Group consists of a 110-3239 Lamp and a 110-3238 Body Assembly and is adaptable to all 24V machines where there is space to mount the lamps. The lamp and body are serviced separately while the 110-3242 Lamp Group is not. Also, a 8T-4122 Mounting Washer and 6B-6683 Mounting Nut must be ordered separately. The 110-3238 Body Assembly has a 5/8-18 mounting stud. The lamp is not case grounded and has two screw terminals on the back to power the lamp.

Some worksites require fog lamps for machines because of working conditions. It is the customer's responsiblitlity to determine if these fog lamps are acceptable and provide the light output necessary for their worksite.

Caterpillar Information System:

1993/10/18 Curved Profile Nosing Bars Are Now Used With The VIP Screed {6643}

1993/10/18 Checking Tightening Torque Of Wheel Assembly Bolts No Longer Necessary At Predelivery {4202}

1993/10/18 Procedure For Tightening Tapered Vertical Hitch Pins {7113,7100}

1993/10/18 Optional Dash Decal Offers English Text Instead Of International Symbols {7405}

1993/10/18 Bearings Are Used To Prevent Seizure Of Rear Suspension Cylinder Pins {3260,7051,7213}

1993/10/18 Proper Sizing Of Transmission Sleeve Bearing Replacement Necessary For Increased Service Life {3160}

1993/10/18 New Differential Group With Tapered Roller Bearings Used For Improved Product Reliability {3258}

1993/10/18 Torque Converter Stall Speeds On Backhoe Loader {3101}

1993/10/18 New Parking Brake Test Procedure {4267}

1993/10/18 New Pinion Bearing Cone Now Being Used To Prevent Bolt Failure {3280}

1993/10/11 New Connecting Rod Identification Used On Engines {1218}

1993/10/11 New O-ring Seal Used On Cylinder Block Covers {1200}

1993/10/18 New Cylinder Head, Spacer Block, And Head Gasket Available {1101,1124,1221}

1993/10/18 Longer Bolts Required With New Spacer Block {1124}

1993/10/25 New Fan Guards Used In Suction Fan Group{1360}

1993/10/25 Change In The Assembly Procedure Of The Damper In The Parking And Service Brake Group Provides Greater Reliability{4151,4267}

1993/10/25 Heavy-Duty Seal Kit Availble For Servicing Brake Calipers{4256,4250}

1993/10/25 Stronger Drive Chains Available For Parts Service{3261}

1993/10/25 Pre-Strikeoff Plates With Angled Deflector Available For VIP Screeds{6646}

1993/10/25 New Clips With Grommets Used On Large Water Lines Prevents Wear{1380}

1993/10/25 New Bracket Replaces Heat Shield In Turbocharger Support Group For Additonal Strength{1050,1073}

1993/11/01 New Thicker Front Wheel Castings Are Used To Increase Wheel Life{4201}

1993/11/01 New Precharge Pressures For Trucks With Two Steering Accumulators{4331}

1993/11/01 Serviceable Parts Available For Tilt Cylinder Load Control Valve Groups{5104,5117,5123,5127}