Usage:
D25D ( 1HK ),
D30D ( 3AJ ),
D350D ( 9RF ),
D40D ( 2JJ ),
D400D ( 8TF ) Trucks
Description of Change: The front frame fabrication has been changed to give improved access to a connection in the hydraulic oil tank level indicator and lighting harness. Previously, it was necessary to remove the fuel tank to get access to this harness.
Adaptable To: Machines in service can be modified in this way any time the fuel tank is removed from the machine. Use the following procedure to rework machine.
1. With the fuel tank removed, disconnect and move the harness away from the area to be modified.
2. Clean off the paint and mark the area to be cut as shown in Illustration 1 or 2.
3. Flame cut and dress grind the marked area.
4. Repaint as required and install the harness and fuel tank.
Illustration 1. Frame modification for D25D, D30D, D350D Trucks. Top view of frame.
Illustration 2. Frame modification for D40D, D400D Trucks. Top view of frame.