1990/10/01 Caterpillar


New Governor Control Bracket Used To Prevent Bolt Loosening {1265}

Usage:


D25D, D30D, D350D Trucks

Description of Change: A new governor control bracket (1) is used. The former bracket had two mounting bolts. These bolts had a tendency to work loose. The new bracket has four mounting bolts. This will help prevent bolt loosening.


Location of the components.

Adaptable To: The new governor control bracket and mounting components are identified in the illustration and chart. The new components are in effect as follows and adaptable to all earlier trucks.

D25D: 1HK165

D30D: 3AJ135

D350D: 9RF214

When installing a new bracket on earlier articulated dump trucks, retain two 8T9043 Bolts (5) and 8T4224 Washers (6) used to mount the former bracket. Install the new components in the location shown.

Caterpillar Information System:

1990/10/01 New Magnetic Sensor Has Improved Shell And Potting Compound {7463,3175}
1990/09/24 Add Bolt Dampers To Oil Pump Mounting Bolts to Prevent Bolt Failures{1304}
1990/09/24 Standard Oval And High Temperature Oval Head Seals Available For Certain Hydraulic Cylinder Applications{7555,5102,5456}
1990/09/24 Sealing Threads On Switches And Sensors That Are Grounded Through The Case{1400,1900,3175,7422,7493}
1990/09/24 Two New Coolant Flow Switches Used On Machines Equipped With Electronic Monitoring System (EMS){1361,7422,7470}
1990/09/24 Improved Access To Hydraulic Oil Level Indicator Harness{7490}
1990/09/24 New Fixed Length Door Stop Used{7308}
1990/09/24 Seal And Seal Holder In Transfer Gear Groups Now Serviced As One Piece{3159}
1990/09/24 New 6R2915 Seal Kit Available For 8C3866 Upper Conveyor Drive Motor{4351}
1990/09/24 Field Installation Kit Available To Install Magnetic Clutch-Type Water Spray Pump, Cutter Drum Interlock, And Kick-Back Shoe{1408,5614,6601,7493}
1990/09/24 New Components Improve Propel And Throttle Adjustments{1265,3209}
1990/09/24 New Support Plate Assembly And Spacers Used{6607}
1990/10/01 What's Your Answer? {0114,1400}
1990/10/01 Correct Light Bulb Replacement For The 8T9290 Borescope; New Light Bulb Used {0777}
1990/10/01 New 4C6090 Multichannel Temperature Selector Available To Aid In Diagnosing Low Power Complaints {0781}
1990/10/01 Incorrect Installation Of Slow-Moving Vehicle Sign (Triangle) May Affect Cooling Performance {7405,1353,7557}
1990/10/01 Answers To Quiz In This Issue {0114,1400}
1990/10/08 Gerotor Charge Pump Used On Propel Pump; Inadequate Charge Pressure May Occur{3204,4320,5070,5082,7428}
1990/10/08 Correct Installation Of Brake Piston Seals{4251}
1990/10/08 Serviced Parts Available For 8C4773 Electric Starting Motor Group{1453}
1990/10/08 Larger Drain Hole In Air Cleaner Group{1051}
1990/10/08 All Wheel Drive System Not Disconnected For Shipping Purposes{7500}
1990/10/08 Improved Rod Seal Combinations Used In Hydraulic Cylinders{4303,5104,5456,5457,5458,5468}
1990/10/08 Improved 4J3815 Gasket Helps Prevent Oil And Air Leaks In Hydraulic Tank Mounting And Filler Groups{5065}
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.