769C TRUCK VEHICLE SYSTEMS Caterpillar

start by:

a) remove cab rear cover

Show/hide table

To prevent possible personal injury do not disconnect any lines from the emergency air reservoir before all air pressure has been released from the air system.

1. Disconnect three lines (1), (2) and (3).

2. Disconnect line (4) from emergency air reservoir (5).

3. Remove four bolts (6) and (7) that hold the emergency air reservoir in place.

4. Remove emergency air reservoir (5).

5. Put the emergency air reservoir (5) in position on the floor behind the cab.

6. Install four bolts (6) and (7) that hold the emergency air reservoir in place.

7. Connect line (4) to the emergency air reservoir.

8. Connect three lines (1), (2) and (3).

end by:

a) install cab rear cover