Usage:
start by:
a) remove cab rear cover
To prevent possible personal injury do not disconnect any lines from the service air reservoir before all air pressure has been released from the air system. |
NOTE: Put identification on all lines to be disconnected.
1. Disconnect four air lines (1), (2), (3) and (4) from upper service air reservoir (5).
2. Remove four bolts (6) that fasten the upper service air reservoir to the brackets on the rear of the cab. Remove the upper service air reservoir.
Install Service Air Reservoir (Upper)
1. Put upper service air reservoir (4) in position on brackets (1) and (2) on the rear of the cab. Install the four bolts (3) that fasten the reservoir to the brackets.
2. Connect four lines (5), (6), (7) and (8) to the upper service air reservoir.
end by:
a) install cab rear cover