PRODUCT SUPPORT PROGRAM FOR REPLACING FAILED INJECTORS AND WIRING HARNESS ON CERTAIN C-9 INDUSTRIAL AND MACHINE ENGINES
Usage:
SEBE8726-02
April 2, 2004
(Revised May 2004)
U-101
A-67
D-80
O-83
Show/hide table
| After failure only |
PRODUCT SUPPORT PROGRAM FOR REPLACING FAILED INJECTORS AND WIRING HARNESS ON CERTAIN C-9 INDUSTRIAL AND MACHINE ENGINES |
|
| 1290 |
PS50780
|
|
NOTE: The information supplied in this service letter may not be valid after the termination date of this program. Do not perform the work outlined in this Service Letter after the termination date without first contacting your Caterpillar product analyst.
NOTE: This Revised Service Letter replaces the April 2, 2004 (Revised April 2004) Service Letter. Changes have been made to the Affected Product.
TERMINATION DATE
- April 30, 2006
PROBLEM
Failed injector and wiring harness need to be replaced on certain C-9 Industrial Engines. The C-9 engine can develop an injector misfire due to an open connection at the injector to harness connector. This misfire can be diagnosed with standard troubleshooting guide procedures.AFFECTED PRODUCT
Show/hide table
| Model |
Identification Number |
| C9 | CLJ1-4259 |
| 12H | 12500001-40
AMZ1-496 CBK1-353 |
| 330C | B1K1-178
B2L1-203 B4N1-187 BTM1-189 CGZ1-511 CYA1-287 D3C1-231 JAB1-626 JCD1-292 JNK1-245 KDD1-580 MCA1-427 MKM1-308 GAG1-329 RBH1-233 |
| 330C L | CAP1-1257
DKY1-2011 HAA1-393 |
| D6R II | AEM1-100
AFM1-115 BLE1-199 BLT1-186 BMK1-121 BNL1-99 BPM1-101 BPP1-97 BPS1-102 BRJ1-116 |
| D6R II LGP | ACJ1-101
ADE1-311 BNC1-265 BPZ1-142 |
| D6R II XL | AAX1-465
BMJ1-130 BMY1-297 BRZ1-115 CAD1-143 FDT1-141 |
| D6R II XW | AEP1-223
DAE1-129 |
| 470 | 7651-811 |
| 475 | 7671-824 |
| MT765 | AMS1-266 |
| TK711 | 10100001-00191 |
| TK721 | 10200001-00191 |
| TK722 | 10300001-00193 |
| TK732 | 10400185-00190 |
| 627G | CEX187-296 |
| 637G | CEH222-255 |
PARTS NEEDED
Show/hide table
Qty |
Part Number |
Description |
|
|
1567106 | Wiring Kit |
|
1889865 | Harness Assembly |
|
|
2359651 | Bolt - Socket |
|
|
2360962 | Injector Group |
ACTION REQUIRED
- Replace the single failed injector with the new 2360962 Injector and the 1889865 Wiring Harness Assembly. Refer to REHS1809 Special Instruction for use of the 1567106 Wiring Kit.
SERVICE CLAIM ALLOWANCES
Show/hide table
Product smu/age whichever comes first |
|
|
|
|||
Parts |
|
|
|
|
|
|
|
0-35 months |
|
|
|
|
|
|
|
|
||||||
PARTS DISPOSITION
- Handle the parts in accordance with your Warranty Bulletin on warranty parts handling.
Caterpillar Information System:
PRODUCT IMPROVEMENT PROGRAM FOR INSTALLING 110-2445 HOSE CLAMPS FOR THE FUEL TANK ON CERTAIN 12H AND 140H MOTOR GRADERS PRODUCT IMPROVEMENT PROGRAM FOR INSTALLING 110-2445 HOSE CLAMPS FOR THE FUEL TANK ON CERTAIN 12H AND 140H MOTOR GRADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING TRANS SOLENOID VALVE CARTRIDGES ON CERTAIN 980G II, 990II, 992G, 994D WHEEL LOADERS; 24H MOTORGRADERS; D11R TRACK TYPE TRACTORS; 769D, 771D, 773E, 775E, 777D, 785C, 789C, 793C OFF HIGHWAY TRUCKS; 740 ARTICULATED PRODUCT SUPPORT PROGRAM FOR REPLACING TRANS SOLENOID VALVE CARTRIDGES ON CERTAIN 980G II, 990II, 992G, 994D WHEEL LOADERS; 24H MOTORGRADERS; D11R TRACK TYPE TRACTORS; 769D, 771D, 773E, 775E, 777D, 785C, 789C, 793C OFF HIGHWAY TRUCKS; 740 ARTICULATED
PRODUCT IMPROVEMENT PROGRAM FOR REFLASHING THE ENGINE AND TRANSMISSION ECM ON CERTAIN 725 AND 730 ARTICULATED DUMP TRUCKS PRODUCT IMPROVEMENT PROGRAM FOR REFLASHING THE ENGINE AND TRANSMISSION ECM ON CERTAIN 725 AND 730 ARTICULATED DUMP TRUCKS
PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE DRAWBAR DRAFT BALL ON CERTAIN 24H MOTOR GRADERS PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE DRAWBAR DRAFT BALL ON CERTAIN 24H MOTOR GRADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE HITCH BEARINGS ON CERTAIN CB214D, CB224D AND CB225D COMPACTORS PRODUCT SUPPORT PROGRAM FOR REPLACING THE HITCH BEARINGS ON CERTAIN CB214D, CB224D AND CB225D COMPACTORS
PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE AIR DRYER ON CERTAIN 611, 615C, AND 657E WHEEL TRACTOR SCRAPERS; AND ON CERTAIN 777D OFF-HIGHWAY TRUCKS PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE AIR DRYER ON CERTAIN 611, 615C, AND 657E WHEEL TRACTOR SCRAPERS; AND ON CERTAIN 777D OFF-HIGHWAY TRUCKS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE OIL GAGE ON CERTAIN IT38G II AND IT62G II INTEGRATED TOOLCARRIERS, 938G II, 950G II, AND 962G II WHEEL LOADERS PRODUCT SUPPORT PROGRAM FOR REPLACING THE OIL GAGE ON CERTAIN IT38G II AND IT62G II INTEGRATED TOOLCARRIERS, 938G II, 950G II, AND 962G II WHEEL LOADERS
PRODUCT IMPROVEMENT PROGRAM FOR REWORKING THE CRANKCASE GUARD PLATE TO ELIMINATE INTERFERENCE WITH THE SECONDARY STEER MOTOR TERMINAL ON CERTAIN 928G WHEEL LOADERS AND IT28G INTEGRATED TOOL CARRIERS PRODUCT IMPROVEMENT PROGRAM FOR REWORKING THE CRANKCASE GUARD PLATE TO ELIMINATE INTERFERENCE WITH THE SECONDARY STEER MOTOR TERMINAL ON CERTAIN 928G WHEEL LOADERS AND IT28G INTEGRATED TOOL CARRIERS
PRODUCT IMPROVEMENT PROGRAM FOR INCREASING THE PUMP OUTPUT FLOW ON CERTAIN TK711, TK721, TK722, TK732, 1090, 1190, 1190T AND 1290T TRACK FELLER BUNCHERS PRODUCT IMPROVEMENT PROGRAM FOR INCREASING THE PUMP OUTPUT FLOW ON CERTAIN TK711, TK721, TK722, TK732, 1090, 1190, 1190T AND 1290T TRACK FELLER BUNCHERS
PRODUCT IMPROVEMENT PROGRAM TO REPLACE THE FLOOR MAT AND REINFORCE THE CAB FLOOR BY ADDING SUPPORT PLATES ON CERTAIN 950G-II, 962G-II, 966G-II, AND 980G-II WHEEL LOADERS PRODUCT IMPROVEMENT PROGRAM TO REPLACE THE FLOOR MAT AND REINFORCE THE CAB FLOOR BY ADDING SUPPORT PLATES ON CERTAIN 950G-II, 962G-II, 966G-II, AND 980G-II WHEEL LOADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING FAILED DRUM ISOLATION MOUNTS ON CERTAIN CS-663E AND CS-683E VIBRATORY SOIL COMPACTORS PRODUCT SUPPORT PROGRAM FOR REPLACING FAILED DRUM ISOLATION MOUNTS ON CERTAIN CS-663E AND CS-683E VIBRATORY SOIL COMPACTORS
PRODUCT IMPROVEMENT PROGRAM FOR REPLACING PLUGS ON CERTAIN 3114, 3116, 3126, AND 3126B ENGINES; 322C, 325C, 325C L MEDIUM EXCAVATORS; 938G II, 950G II, 962G II MEDIUM WHEEL LOADERS, 953C AND 963C TRACK LOADERS, D5N LGP, D5N XL, D6N LGP, D6N-XL, D6N X PRODUCT IMPROVEMENT PROGRAM FOR REPLACING PLUGS ON CERTAIN 3114, 3116, 3126, AND 3126B ENGINES; 322C, 325C, 325C L MEDIUM EXCAVATORS; 938G II, 950G II, 962G II MEDIUM WHEEL LOADERS, 953C AND 963C TRACK LOADERS, D5N LGP, D5N XL, D6N LGP, D6N-XL, D6N X
PRODUCT IMPROVEMENT PROGRAM FOR INSTALLING AN IMPROVED TCS CHECK VALVE IN CERTAIN 797 AND 797B OFF-HIGHWAY TRUCKS PRODUCT IMPROVEMENT PROGRAM FOR INSTALLING AN IMPROVED TCS CHECK VALVE IN CERTAIN 797 AND 797B OFF-HIGHWAY TRUCKS
PRODUCT IMPROVEMENT PROGRAM FOR DRILLING A BYPASS ORIFICE IN THE MANIFOLD ON CERTAIN 815F SOIL COMPACTOR AND 816F LANDFILL COMPACTOR PRODUCT IMPROVEMENT PROGRAM FOR DRILLING A BYPASS ORIFICE IN THE MANIFOLD ON CERTAIN 815F SOIL COMPACTOR AND 816F LANDFILL COMPACTOR
PRODUCT SUPPORT PROGRAM FOR REPAIRING CRACKS IN THE HYDRAULIC OIL TANK OF CERTAIN 735, 740 EJECTOR, AND 740 ARTICULATED TRUCKS PRODUCT SUPPORT PROGRAM FOR REPAIRING CRACKS IN THE HYDRAULIC OIL TANK OF CERTAIN 735, 740 EJECTOR, AND 740 ARTICULATED TRUCKS
PRODUCT SUPPORT PROGRAM FOR INSTALLING A NEW ENGINE PRELUBE PUMP GROUP ON CERTAIN 793C OFF-HIGHWAY TRUCKS PRODUCT SUPPORT PROGRAM FOR INSTALLING A NEW ENGINE PRELUBE PUMP GROUP ON CERTAIN 793C OFF-HIGHWAY TRUCKS
PRODUCT SUPPORT PROGRAM FOR INSTALLING A NEW ENGINE PRELUBE PUMP GROUP ON CERTAIN 793C OFF-HIGHWAY TRUCKS PRODUCT SUPPORT PROGRAM FOR INSTALLING A NEW ENGINE PRELUBE PUMP GROUP ON CERTAIN 793C OFF-HIGHWAY TRUCKS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE FLOATING AFTERCOOLER CORE BOLTS ON CERTAIN 797 AND 797B LARGE OFF HIGHWAY TRUCKS PRODUCT SUPPORT PROGRAM FOR REPLACING THE FLOATING AFTERCOOLER CORE BOLTS ON CERTAIN 797 AND 797B LARGE OFF HIGHWAY TRUCKS
PRODUCT IMPROVEMENT PROGRAM FOR REMOVING CERTAIN REMANUFCTURED FUEL INJECTORS FROM DEALER PARTS STOCK PRODUCT IMPROVEMENT PROGRAM FOR REMOVING CERTAIN REMANUFCTURED FUEL INJECTORS FROM DEALER PARTS STOCK
PRODUCT SUPPORT PROGRAM FOR REPLACING FAILED ATAAC LINES AND INSTALLING CLAMPS ON CERTAIN 725 AND 730 ARTICULATED TRUCKS PRODUCT SUPPORT PROGRAM FOR REPLACING FAILED ATAAC LINES AND INSTALLING CLAMPS ON CERTAIN 725 AND 730 ARTICULATED TRUCKS
PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE SERVICE BRAKE ACCUMULATOR DECALS ON CERTAIN 725 AND 730 ARTICULATED TRUCKS PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE SERVICE BRAKE ACCUMULATOR DECALS ON CERTAIN 725 AND 730 ARTICULATED TRUCKS
PRODUCT SUPPORT PROGRAM FOR INSTALLING ADDITIONAL CLEANING ACCESS HOLES AND NEW WHEELS ON CERTAIN 287 MULTI TERRAIN LOADERS PRODUCT SUPPORT PROGRAM FOR INSTALLING ADDITIONAL CLEANING ACCESS HOLES AND NEW WHEELS ON CERTAIN 287 MULTI TERRAIN LOADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE PLUS TIPS ON CERTAIN 826G, 826G II, 836 AND 836G COMPACTORS PRODUCT SUPPORT PROGRAM FOR REPLACING THE PLUS TIPS ON CERTAIN 826G, 826G II, 836 AND 836G COMPACTORS
PRODUCT IMPROVEMENT PROGRAM FOR INSTALLING NEW CONTROL SOFTWARE ON CERTAIN AP-655C ASPHALT PAVERS PRODUCT IMPROVEMENT PROGRAM FOR INSTALLING NEW CONTROL SOFTWARE ON CERTAIN AP-655C ASPHALT PAVERS