PRODUCT SUPPORT PROGRAM FOR REPLACING THE HITCH BEARINGS ON CERTAIN CB214D, CB224D AND CB225D COMPACTORS Caterpillar

PRODUCT SUPPORT PROGRAM FOR REPLACING THE HITCH BEARINGS ON CERTAIN CB214D, CB224D AND CB225D COMPACTORS

Usage:

SEBE8703

March 21, 2004
U-79
A-57
D-61
O-64

Show/hide table

*before or* *after failure*	PRODUCT SUPPORT PROGRAM FOR REPLACING THE HITCH BEARINGS ON CERTAIN CB214D, CB224D AND CB225D COMPACTORS
7057 7113		PS41494

NOTE: This Program can be administered either before or after failure. In either case the decision whether to apply the Program is made by the dealer. When reporting the repair, use "PS41494" as the Part number and "7755" as the Group Number. If administered before failure, use "56" as the Warranty Claim Description Code and use "T" as the SIMS Description Code. If administered after failure, use "96" as the Warranty Claim Description Code and use "Z" as the SIMS Description Code.

NOTE: The information supplied in this service letter may not be valid after the termination date of this program. Do not perform the work outlined in this Service Letter after the termination date without first contacting your Caterpillar product analyst.

TERMINATION DATE

March 31, 2006

PROBLEM

The hitch bearings need to be replaced on certain CB214D, CB224D and CB225D Compactors. The 1554242 Bearings may fail when the machine is used in heavy application or, in some instances, when the machine is improperly tied down during transporting.

AFFECTED PRODUCT

Show/hide table

Model	Identification Number
CB-214D	1TZ1-1163
CB-224D	8RZ1-2185
CB-225D	9FZ1-478

PARTS NEEDED

Show/hide table

Qty	Part Number	Description
4	8T4132	Nut
4	7X0515	Washer ? Hard
4	7X2554	Bolt
2	1440274	Bearing Group

ACTION REQUIRED

Secure the machine by supporting the two half frame properly.
Remove the existing bearings.
Install the 1440274 Bearings with 7X0515 Washers between bolt head and bearing foot.
Tighten the bolts to a torque of 240 N.m.
Grease the bearings.

SERVICE CLAIM ALLOWANCES

Show/hide table

Product smu	Caterpillar		Dealer Suggested		Customer Suggested
Product smu	Parts	Labor Hrs	Parts	Labor Hrs	Parts	Labor Hrs
0-1000	100%	2	0	0	0	0
NOTE: This is a 2?hour job if done before failure. An additional one hour will be allowed if there is any resultant damage caused by the failure.

PARTS DISPOSITION

Handle the parts in accordance with your Warranty Bulletin on warranty parts handling.

Caterpillar Information System:

PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE AIR DRYER ON CERTAIN 611, 615C, AND 657E WHEEL TRACTOR SCRAPERS; AND ON CERTAIN 777D OFF-HIGHWAY TRUCKS PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE AIR DRYER ON CERTAIN 611, 615C, AND 657E WHEEL TRACTOR SCRAPERS; AND ON CERTAIN 777D OFF-HIGHWAY TRUCKS

PRODUCT SUPPORT PROGRAM FOR REPLACING THE OIL GAGE ON CERTAIN IT38G II AND IT62G II INTEGRATED TOOLCARRIERS, 938G II, 950G II, AND 962G II WHEEL LOADERS PRODUCT SUPPORT PROGRAM FOR REPLACING THE OIL GAGE ON CERTAIN IT38G II AND IT62G II INTEGRATED TOOLCARRIERS, 938G II, 950G II, AND 962G II WHEEL LOADERS

PRODUCT IMPROVEMENT PROGRAM FOR REWORKING THE CRANKCASE GUARD PLATE TO ELIMINATE INTERFERENCE WITH THE SECONDARY STEER MOTOR TERMINAL ON CERTAIN 928G WHEEL LOADERS AND IT28G INTEGRATED TOOL CARRIERS PRODUCT IMPROVEMENT PROGRAM FOR REWORKING THE CRANKCASE GUARD PLATE TO ELIMINATE INTERFERENCE WITH THE SECONDARY STEER MOTOR TERMINAL ON CERTAIN 928G WHEEL LOADERS AND IT28G INTEGRATED TOOL CARRIERS

PRODUCT IMPROVEMENT PROGRAM FOR INCREASING THE PUMP OUTPUT FLOW ON CERTAIN TK711, TK721, TK722, TK732, 1090, 1190, 1190T AND 1290T TRACK FELLER BUNCHERS PRODUCT IMPROVEMENT PROGRAM FOR INCREASING THE PUMP OUTPUT FLOW ON CERTAIN TK711, TK721, TK722, TK732, 1090, 1190, 1190T AND 1290T TRACK FELLER BUNCHERS

PRODUCT IMPROVEMENT PROGRAM TO REPLACE THE FLOOR MAT AND REINFORCE THE CAB FLOOR BY ADDING SUPPORT PLATES ON CERTAIN 950G-II, 962G-II, 966G-II, AND 980G-II WHEEL LOADERS PRODUCT IMPROVEMENT PROGRAM TO REPLACE THE FLOOR MAT AND REINFORCE THE CAB FLOOR BY ADDING SUPPORT PLATES ON CERTAIN 950G-II, 962G-II, 966G-II, AND 980G-II WHEEL LOADERS

PRODUCT SUPPORT PROGRAM FOR REPLACING FAILED DRUM ISOLATION MOUNTS ON CERTAIN CS-663E AND CS-683E VIBRATORY SOIL COMPACTORS PRODUCT SUPPORT PROGRAM FOR REPLACING FAILED DRUM ISOLATION MOUNTS ON CERTAIN CS-663E AND CS-683E VIBRATORY SOIL COMPACTORS

PRODUCT IMPROVEMENT PROGRAM FOR REPLACING PLUGS ON CERTAIN 3114, 3116, 3126, AND 3126B ENGINES; 322C, 325C, 325C L MEDIUM EXCAVATORS; 938G II, 950G II, 962G II MEDIUM WHEEL LOADERS, 953C AND 963C TRACK LOADERS, D5N LGP, D5N XL, D6N LGP, D6N-XL, D6N X PRODUCT IMPROVEMENT PROGRAM FOR REPLACING PLUGS ON CERTAIN 3114, 3116, 3126, AND 3126B ENGINES; 322C, 325C, 325C L MEDIUM EXCAVATORS; 938G II, 950G II, 962G II MEDIUM WHEEL LOADERS, 953C AND 963C TRACK LOADERS, D5N LGP, D5N XL, D6N LGP, D6N-XL, D6N X

PRODUCT SUPPORT PROGRAM FOR INSTALLING AN IMPROVED MOUNTING DESIGN TO REDUCE VIBRATION INTO THE SWITCH ON CERTAIN 824G WHEEL DOZERS, 825G SOIL COMPACTORS, 826G LANDFILL COMPACTORS, AND 980G II MEDIUM WHEEL LOADERS PRODUCT SUPPORT PROGRAM FOR INSTALLING AN IMPROVED MOUNTING DESIGN TO REDUCE VIBRATION INTO THE SWITCH ON CERTAIN 824G WHEEL DOZERS, 825G SOIL COMPACTORS, 826G LANDFILL COMPACTORS, AND 980G II MEDIUM WHEEL LOADERS

PRODUCT IMPROVEMENT PROGRAM FOR INSTALLING PROTECTIVE GUARDS FOR THE SCREED EXTENSION SWITCHES ON CERTAIN AP-650B, AP-655C, AP-800C, AP-900B, AP-1000, AP-1000B, AP-1050 AP-1050B, AND AP-1055B ASPHALT PAVERS; AND ON CERTAIN BARBER-GREENE BG-210B, BG-2 PRODUCT IMPROVEMENT PROGRAM FOR INSTALLING PROTECTIVE GUARDS FOR THE SCREED EXTENSION SWITCHES ON CERTAIN AP-650B, AP-655C, AP-800C, AP-900B, AP-1000, AP-1000B, AP-1050 AP-1050B, AND AP-1055B ASPHALT PAVERS; AND ON CERTAIN BARBER-GREENE BG-210B, BG-2

PRODUCT IMPROVEMENT PROGRAM FOR INSTALLING A NEW PLUG ASSEMBLY IN THE 169-1751 TCS TRACTION CONTROL VALVE ON CERTAIN 797 AND 797B OFF-HIGHWAY TRUCKS PRODUCT IMPROVEMENT PROGRAM FOR INSTALLING A NEW PLUG ASSEMBLY IN THE 169-1751 TCS TRACTION CONTROL VALVE ON CERTAIN 797 AND 797B OFF-HIGHWAY TRUCKS

PRODUCT IMPROVEMENT PROGRAM FOR REWORKING THE PREHEATER ON CERTAIN TK711, TK721, TK722, TK732 AND 1290T TRACK FELLER BUNCHERS PRODUCT IMPROVEMENT PROGRAM FOR REWORKING THE PREHEATER ON CERTAIN TK711, TK721, TK722, TK732 AND 1290T TRACK FELLER BUNCHERS

PRODUCT IMPROVEMENT PROGRAM FOR UPDATING THE AUXILIARY HYDRAULICS SOFTWARE ON CERTAIN 420D IT AND 430D IT BACKHOE LOADERS PRODUCT IMPROVEMENT PROGRAM FOR UPDATING THE AUXILIARY HYDRAULICS SOFTWARE ON CERTAIN 420D IT AND 430D IT BACKHOE LOADERS

PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE DRAWBAR DRAFT BALL ON CERTAIN 24H MOTOR GRADERS PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE DRAWBAR DRAFT BALL ON CERTAIN 24H MOTOR GRADERS

PRODUCT IMPROVEMENT PROGRAM FOR REFLASHING THE ENGINE AND TRANSMISSION ECM ON CERTAIN 725 AND 730 ARTICULATED DUMP TRUCKS PRODUCT IMPROVEMENT PROGRAM FOR REFLASHING THE ENGINE AND TRANSMISSION ECM ON CERTAIN 725 AND 730 ARTICULATED DUMP TRUCKS

PRODUCT SUPPORT PROGRAM FOR REPLACING TRANS SOLENOID VALVE CARTRIDGES ON CERTAIN 980G II, 990II, 992G, 994D WHEEL LOADERS; 24H MOTORGRADERS; D11R TRACK TYPE TRACTORS; 769D, 771D, 773E, 775E, 777D, 785C, 789C, 793C OFF HIGHWAY TRUCKS; 740 ARTICULATED PRODUCT SUPPORT PROGRAM FOR REPLACING TRANS SOLENOID VALVE CARTRIDGES ON CERTAIN 980G II, 990II, 992G, 994D WHEEL LOADERS; 24H MOTORGRADERS; D11R TRACK TYPE TRACTORS; 769D, 771D, 773E, 775E, 777D, 785C, 789C, 793C OFF HIGHWAY TRUCKS; 740 ARTICULATED

PRODUCT IMPROVEMENT PROGRAM FOR INSTALLING 110-2445 HOSE CLAMPS FOR THE FUEL TANK ON CERTAIN 12H AND 140H MOTOR GRADERS PRODUCT IMPROVEMENT PROGRAM FOR INSTALLING 110-2445 HOSE CLAMPS FOR THE FUEL TANK ON CERTAIN 12H AND 140H MOTOR GRADERS

PRODUCT SUPPORT PROGRAM FOR REPLACING FAILED INJECTORS AND WIRING HARNESS ON CERTAIN C-9 INDUSTRIAL AND MACHINE ENGINES PRODUCT SUPPORT PROGRAM FOR REPLACING FAILED INJECTORS AND WIRING HARNESS ON CERTAIN C-9 INDUSTRIAL AND MACHINE ENGINES

PRODUCT IMPROVEMENT PROGRAM FOR INSTALLING AN IMPROVED TCS CHECK VALVE IN CERTAIN 797 AND 797B OFF-HIGHWAY TRUCKS PRODUCT IMPROVEMENT PROGRAM FOR INSTALLING AN IMPROVED TCS CHECK VALVE IN CERTAIN 797 AND 797B OFF-HIGHWAY TRUCKS

PRODUCT IMPROVEMENT PROGRAM FOR DRILLING A BYPASS ORIFICE IN THE MANIFOLD ON CERTAIN 815F SOIL COMPACTOR AND 816F LANDFILL COMPACTOR PRODUCT IMPROVEMENT PROGRAM FOR DRILLING A BYPASS ORIFICE IN THE MANIFOLD ON CERTAIN 815F SOIL COMPACTOR AND 816F LANDFILL COMPACTOR

PRODUCT SUPPORT PROGRAM FOR REPAIRING CRACKS IN THE HYDRAULIC OIL TANK OF CERTAIN 735, 740 EJECTOR, AND 740 ARTICULATED TRUCKS PRODUCT SUPPORT PROGRAM FOR REPAIRING CRACKS IN THE HYDRAULIC OIL TANK OF CERTAIN 735, 740 EJECTOR, AND 740 ARTICULATED TRUCKS

PRODUCT SUPPORT PROGRAM FOR INSTALLING A NEW ENGINE PRELUBE PUMP GROUP ON CERTAIN 793C OFF-HIGHWAY TRUCKS PRODUCT SUPPORT PROGRAM FOR INSTALLING A NEW ENGINE PRELUBE PUMP GROUP ON CERTAIN 793C OFF-HIGHWAY TRUCKS

PRODUCT SUPPORT PROGRAM FOR INSTALLING A NEW ENGINE PRELUBE PUMP GROUP ON CERTAIN 793C OFF-HIGHWAY TRUCKS PRODUCT SUPPORT PROGRAM FOR INSTALLING A NEW ENGINE PRELUBE PUMP GROUP ON CERTAIN 793C OFF-HIGHWAY TRUCKS

PRODUCT SUPPORT PROGRAM FOR REPLACING THE FLOATING AFTERCOOLER CORE BOLTS ON CERTAIN 797 AND 797B LARGE OFF HIGHWAY TRUCKS PRODUCT SUPPORT PROGRAM FOR REPLACING THE FLOATING AFTERCOOLER CORE BOLTS ON CERTAIN 797 AND 797B LARGE OFF HIGHWAY TRUCKS

PRODUCT IMPROVEMENT PROGRAM FOR REMOVING CERTAIN REMANUFCTURED FUEL INJECTORS FROM DEALER PARTS STOCK PRODUCT IMPROVEMENT PROGRAM FOR REMOVING CERTAIN REMANUFCTURED FUEL INJECTORS FROM DEALER PARTS STOCK