Operation And Maintenance Manual For 3600 Diesel Marine Monitoring System Has Been Revised {0374,7490}
Usage:
3606 (8RB),
3608 (6MC),
3612 (9RC, 9FR),
3618 (2MW) Engines in Marine Applications
The Operation and Maintenance Manual, SEBU7134-02, 3600 Diesel Marine Monitoring System, is available through normal Caterpillar literature ordering channels. This former Owner's Manual has been revised and changed into an Operations and Maintenance Manual. This revised manual includes information about general operations, troubleshooting, tooling recommendations, spare parts recommendations, testing and adjusting, and parts.
Caterpillar Information System:
1999/07/01 "Guidelines For 3600 Heavy Fuel Oil (HFO) Engines" Has Been Revised {0374,1000}
1999/07/01 O-Ring Seals Included On Terminal Assembly For The Electronic Ignition System (EIS) Transformer Group {1561}
1999/07/01 Be Sure The Cylinder Head Bore For the Unit Injector Is Clean When the Unit Injector Is Replaced {1290}
1999/07/01 New Fuel Priming Pump Assemblies Used {1258}
1999/07/01 New Basic Fuel Transfer Pump Group Includes New Outer Lip Type Seal {1256}
1999/07/01 New Position Sensor Group (Throttle) {1913}
1999/07/01 New Stronger Bolts and Washers Help Prevent Oil Leaks At Rear Power Take Off (RPTO) Flywheel Housing To Block Joint {1157}
1999/06/01 New Voltage Sensing Transformer Improves Reliability {4477}
1999/06/01 Rain Protection Shield Assemblies Available For Engine Junction Box And Engine Supervisory System (ESS) Control Panel {7426,7490,7555}
1999/06/01 Replacement Frequency Transmitters Must Be Reconfigured For Marine Monitoring System (MMS) {7400}
1999/06/01 Postlube Feature Added To Marine Monitoring System (MMS) {7400,1319}
1999/06/01 Change The Marine Monitoring System (MMS) Default Setting To Prevent Filling The Hard Drive {7400}
1999/07/01 Worldwide Listing Of ABB Turbocharger Service Stations {1052}
1999/07/01 High Performance Aftercooler (HPAC) Parts Kits Available {1063}
1999/07/01 New Piston Assembly Used {1214}
1999/07/01 New Connecting Rod Bolt Tightening Procedure {1218}
1999/07/01 Follow Fuel Changeover Procedure Before Synchronizing Fuel Injectors On Heavy Fuel Oil (HFO) Engines {1250,1274,1280,0374}
1999/07/01 Risks Of Extended Oil Change Interval Practices {1300}
1999/07/01 Centrifugal Oil Filter Group Revised To Allow Higher Operating Pressures {1328}
1999/07/01 A New Control Assembly (XYCOM Monitor) Is Used In The Marine Monitoring System (MMS); Special Instruction With Procedure For Replacing The Former Control Assembly With The New Control Assembly Available {1901}
1999/07/01 Marine Monitoring System (MMS) Thermocouple Wiring Color Codes {1906,1919,1921,1922,1929,7498}
1999/07/01 An Improved Watertight Junction Box Assembly And Watertight Electronic Box Groups Are Used {7426,7490,7555}
1999/08/01 Caterpillar Service Technology Group (CSTG) Software Help Desk Changes{1920}
1999/08/01 New Material Improved Durability For STAY CLEAN VALVE(r) In Caterpillar High Efficiency Fuel Filters{1262}