1999/06/01 Caterpillar


Postlube Feature Added To Marine Monitoring System (MMS) {7400,1319}

Usage:


3606 (8RB688-Up),
3608 (6MC582-Up),
3612 (9RC256-Up),
3616 (1PD328-Up) Engines

A postlube feature has been added to the Marine Monitoring System (MMS) Programmable Logic Controller (PLC) software on these engines. This feature will turn on the prelube pump for 60 seconds after the engine is shut down. The postlube feature has been added in order to accommodate the postlube recommendations of the new turbochargers.

NOTE: Postlube does NOT occur following an emergency shutdown (E-Stop).

Caterpillar Information System:

1999/06/01 Change The Marine Monitoring System (MMS) Default Setting To Prevent Filling The Hard Drive {7400}
1999/06/01 Improved Oil Level Contactor Groups {1326,7450}
1999/06/01 New Transformer Group Has New Transformer Assembly For Improved Reliability {1561}
1999/06/01 New Breather Group And Additional Fumes Disposal Group Used {1317}
1999/06/01 Suggested Ways To Increase 3500 Unit Injector Service Life {1290}
1999/06/01 New Camshaft Cover Seal, Crankshaft Cover Seal, And Valve Cover Seal Help Prevent Oil Leaks {1107,1150,1200}
1999/06/01 New Exhaust Shield Group For Dry Exhaust Manifold Engines Has Updated Shield Assemblies {1059,1061,1067,1073}
1999/06/01 Several New Service Manuals And Revised Service Manual Modules Available {0374,1000}
1999/06/01 New Automated Cylinder Cutout Test Available With Electronic Technician (ET) Version 2.4 Software Release {0781,1920}
1999/06/01 New Fuel Nozzles Resist Adapter Cracking And Leaking {1254}
1999/06/01 New Adapter Used In Aftercooler Group For Separate Circuit Aftercooler System {1063}
1999/06/01 New Main Bearing Material {1203}
1999/06/01 Replacement Frequency Transmitters Must Be Reconfigured For Marine Monitoring System (MMS) {7400}
1999/06/01 Rain Protection Shield Assemblies Available For Engine Junction Box And Engine Supervisory System (ESS) Control Panel {7426,7490,7555}
1999/06/01 New Voltage Sensing Transformer Improves Reliability {4477}
1999/07/01 New Stronger Bolts and Washers Help Prevent Oil Leaks At Rear Power Take Off (RPTO) Flywheel Housing To Block Joint {1157}
1999/07/01 New Position Sensor Group (Throttle) {1913}
1999/07/01 New Basic Fuel Transfer Pump Group Includes New Outer Lip Type Seal {1256}
1999/07/01 New Fuel Priming Pump Assemblies Used {1258}
1999/07/01 Be Sure The Cylinder Head Bore For the Unit Injector Is Clean When the Unit Injector Is Replaced {1290}
1999/07/01 O-Ring Seals Included On Terminal Assembly For The Electronic Ignition System (EIS) Transformer Group {1561}
1999/07/01 "Guidelines For 3600 Heavy Fuel Oil (HFO) Engines" Has Been Revised {0374,1000}
1999/07/01 Operation And Maintenance Manual For 3600 Diesel Marine Monitoring System Has Been Revised {0374,7490}
1999/07/01 Worldwide Listing Of ABB Turbocharger Service Stations {1052}
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.