1999/08/01 Caterpillar


New Material Improved Durability For STAY CLEAN VALVE(r) In Caterpillar High Efficiency Fuel Filters{1262}

Usage:


All Caterpillar Commercial Diesel Engines

Reference: Engine News, April 1999, Page 1 "New Caterpillar High Efficiency Fuel Filters With STAY CLEAN VALVES(r) Replace All Standard Fuel Filters In February Of 1999"

The Reference Article introduced the Caterpillar High Efficiency Fuel Filters equipped with STAY CLEAN VALVES(r). The STAY CLEAN VALVES(r) are now made from a different material which results in improved durability. The new valve material is WHITE, while the former valve material was BLACK. The part numbers of the Caterpillar High Efficiency Fuel Filters with the new WHITE STAY CLEAN VALVES(r) have not changed. Use the chart as a cross reference for the new and former fuel filter part numbers.

The STAY CLEAN VALVES(r) will prevent unfiltered fuel, which may contain abrasive contaminants, from entering the clean side of the fuel filter. Unfiltered fuel may cause damage to the engine's fuel system. IT IS IMPORTANT TO PRIME, AND NOT PREFILL, REPLACEMENT FILTERS IN ORDER TO ENSURE THAT FUEL SYSTEMS RECEIVE FILTERED FUEL ONLY.

Caterpillar Information System:

1999/08/01 Caterpillar Service Technology Group (CSTG) Software Help Desk Changes{1920}
1999/07/01 An Improved Watertight Junction Box Assembly And Watertight Electronic Box Groups Are Used {7426,7490,7555}
1999/07/01 Marine Monitoring System (MMS) Thermocouple Wiring Color Codes {1906,1919,1921,1922,1929,7498}
1999/07/01 A New Control Assembly (XYCOM Monitor) Is Used In The Marine Monitoring System (MMS); Special Instruction With Procedure For Replacing The Former Control Assembly With The New Control Assembly Available {1901}
1999/07/01 Centrifugal Oil Filter Group Revised To Allow Higher Operating Pressures {1328}
1999/07/01 Risks Of Extended Oil Change Interval Practices {1300}
1999/07/01 Follow Fuel Changeover Procedure Before Synchronizing Fuel Injectors On Heavy Fuel Oil (HFO) Engines {1250,1274,1280,0374}
1999/07/01 New Connecting Rod Bolt Tightening Procedure {1218}
1999/07/01 New Piston Assembly Used {1214}
1999/07/01 High Performance Aftercooler (HPAC) Parts Kits Available {1063}
1999/07/01 Worldwide Listing Of ABB Turbocharger Service Stations {1052}
1999/07/01 Operation And Maintenance Manual For 3600 Diesel Marine Monitoring System Has Been Revised {0374,7490}
1999/08/01 Extended Life Coolant - Still the Coolant of Choice{1395}
1999/08/01 New Service Manuals and Revised Service Manuals Available{0374,1000}
1999/08/01 Cold Start Advance Solenoid Available{1272,1250}
1999/08/01 Troubleshooting Hard Starting{1250}
1999/08/01 Several New Service Manuals and Revised Service Manual Modules Available{0374,1000}
1999/08/01 New Governor Control (Load Share Module) For Generator Set Engines{7490}
1999/09/01 New 173-1530 Injector Seating Tool Group Available{0710,1290}
1999/09/01 Engine Control For Dynamometer Or Diagnostic Testing{1000}
1999/09/01 Wider Crankshaft Gear Used{1204}
1999/09/01 New Caterpillar Digital Ignition System Provides Improvements Over Magneto Systems{1550,1552}
1999/09/01 New Gasket Allows Easier Spark Plug Service{1555}
1999/09/01 New Electronic Control Module For 3408E And 3412E Engines{1901}
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.