Dial Face Changed On 8S2263 Valve Spring Tester{1108}
Usage:
The dial face of the 8S2263 Valve Spring Tester now reads in newtons only. Formerly, both pounds and newtons were shown. The tester has a maximum capacity of 1555 newtons.
Caterpillar Information System:
1983/06/06 Reference Chart For Service Magazine Articles On Improvements To All 3300 Series Engines{0374}
1983/05/30 Correct Lubrication Instruction Films Now Used{7557,1300}
1983/05/30 Installation Procedure For Bowl, Bucket And Ripper Tips{6805,6808}
1983/05/30 Wellhead And Sour Gas Can Cause Shortened Service Life For Gas Engines{1000,1250}
1983/05/30 New Circle Shoes With Replaceable Wear Strips Used{6154,6155}
1983/05/30 Seal And Valve Repair Kit Available To Service Relay Valve{4280}
1983/05/30 Information Concerning Caterpillar XT Hose{7554,0374}
1983/05/30 New Rod Ends With Steel Bearings Are Now Used For The Transmission Control Linkage{3156}
1983/05/30 Special Procedure Needed To Clean 3500 Series Engine Pistons{0374,1214}
1983/05/30 New Piston Ring Group Used{1215}
1983/05/30 Installation Procedure For Woodward 3161 and UG8 Governors{1264}
1983/05/23 Anti-Spin Control Available To Improve Traction{4250,4001}
1983/06/06 Remanufactured Alternators And Starting Motors Are Available{1405,1453}
1983/06/06 Removal Of TARP (Rust Preventive){0355,0670,1000,7000}
1983/06/06 Sealed Bearings Available For Pump Drive Shaft Universal Joint{3251,3253}
1983/06/20 New Fuel Priming Pump Used{1258}
1983/06/20 6V7100 Combustible Gas Leak Detector And 6V7103 Calibration Kit Available{0651}
1983/06/20 Differential Bevel Pinion Has Permanently Bonded Plug{3254,3258}
1983/06/20 Seal Kit Available For Differential Lock Solenoid{3272}
1983/06/20 New Double-Wall Fuel Injection Lines Group And Fuel Drain Group Available As Attachments For Protection Against Fuel Leakage{1252,1254,7400}
1983/06/20 Frequency Meter Failure; Make Sure It is Connected To The Correct Voltage{7471,7002}
1983/07/04 Prevent Damage To Brake Lining Before And During Installation{4254,4001}
1983/07/04 Improved Governor Control Shaft And Seal Will Help Prevent Oil Leakage{1265}
1983/07/04 Different Method Can Be Used To Take Oil Sample{5057,0372}