1983/05/30 Caterpillar


Special Procedure Needed To Clean 3500 Series Engine Pistons{0374,1214}

Usage:


The piston used in a 3500 Series Engine has a graphite coating on the skirt and an oil passage that runs along the inside circumference of the crown. These characteristics make it necessary to use a special procedure to clean it. See Guideline For Reusable Parts - Procedure To Clean And Inspect 3500 Series Engine Pistons, Form No. SEBF8059, for complete details on how to clean the piston correctly.

Caterpillar Information System:

1983/05/30 New Piston Ring Group Used{1215}
1983/05/30 Installation Procedure For Woodward 3161 and UG8 Governors{1264}
1983/05/23 Anti-Spin Control Available To Improve Traction{4250,4001}
1983/05/23 Use The 6V4930 Battery Load Tester To Test Batteries{0651}
1983/05/23 New Core Assembly Used In Transmission Oil Cooler{1375}
1983/05/16 Reuse Of Engine Bearings{1230}
1983/05/16 Installation Procedure For Seals On Cab Doors{7308}
1983/05/16 Selection Of The Correct Battery For Use With Diagnostic Tools{1401,0650}
1983/05/16 Procedure To Clean Oil Passages In Crankshafts And Cylinder Blocks{0622,0675,1201,1202}
1983/05/16 New Planet Carrier Shafts And Pins For Transmission{3150}
1983/05/16 Use Care During Removal Of The Oil Line Screen For Brake And Torque Converter Oil Cooler{1307,1366,0374}
1983/05/16 New Specification For Clearance Between Fuel Rack Slot And Cross Link{1257}
1983/05/30 New Rod Ends With Steel Bearings Are Now Used For The Transmission Control Linkage{3156}
1983/05/30 Information Concerning Caterpillar XT Hose{7554,0374}
1983/05/30 Seal And Valve Repair Kit Available To Service Relay Valve{4280}
1983/05/30 New Circle Shoes With Replaceable Wear Strips Used{6154,6155}
1983/05/30 Wellhead And Sour Gas Can Cause Shortened Service Life For Gas Engines{1000,1250}
1983/05/30 Installation Procedure For Bowl, Bucket And Ripper Tips{6805,6808}
1983/05/30 Correct Lubrication Instruction Films Now Used{7557,1300}
1983/06/06 Reference Chart For Service Magazine Articles On Improvements To All 3300 Series Engines{0374}
1983/06/06 Dial Face Changed On 8S2263 Valve Spring Tester{1108}
1983/06/06 Remanufactured Alternators And Starting Motors Are Available{1405,1453}
1983/06/06 Removal Of TARP (Rust Preventive){0355,0670,1000,7000}
1983/06/06 Sealed Bearings Available For Pump Drive Shaft Universal Joint{3251,3253}
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.