1983/06/20 Caterpillar


New Fuel Priming Pump Used{1258}

Usage:


963, 973 Loaders;
D8L, D9G, D9H, DD9H, SXS D9H, D9L, D10 Tractors;
594, 594H Pipelayers;
992C Loaders;
768C Tractors And 769C Trucks

Description of Change: A new fuel priming pump is used on the models shown above. The new pumps have more resistance to leakage and also have an improved design to lock and unlock the handle.

Adaptable As: The new 2W2605 Fuel Priming Pump is a direct replacement for the former 8N490 Fuel Priming Pump, which is canceled. A 1P436 Gasket will be needed when the pump is installed.

Caterpillar Information System:

1983/06/06 Sealed Bearings Available For Pump Drive Shaft Universal Joint{3251,3253}
1983/06/06 Removal Of TARP (Rust Preventive){0355,0670,1000,7000}
1983/06/06 Remanufactured Alternators And Starting Motors Are Available{1405,1453}
1983/06/06 Dial Face Changed On 8S2263 Valve Spring Tester{1108}
1983/06/06 Reference Chart For Service Magazine Articles On Improvements To All 3300 Series Engines{0374}
1983/05/30 Correct Lubrication Instruction Films Now Used{7557,1300}
1983/05/30 Installation Procedure For Bowl, Bucket And Ripper Tips{6805,6808}
1983/05/30 Wellhead And Sour Gas Can Cause Shortened Service Life For Gas Engines{1000,1250}
1983/05/30 New Circle Shoes With Replaceable Wear Strips Used{6154,6155}
1983/05/30 Seal And Valve Repair Kit Available To Service Relay Valve{4280}
1983/05/30 Information Concerning Caterpillar XT Hose{7554,0374}
1983/05/30 New Rod Ends With Steel Bearings Are Now Used For The Transmission Control Linkage{3156}
1983/06/20 6V7100 Combustible Gas Leak Detector And 6V7103 Calibration Kit Available{0651}
1983/06/20 Differential Bevel Pinion Has Permanently Bonded Plug{3254,3258}
1983/06/20 Seal Kit Available For Differential Lock Solenoid{3272}
1983/06/20 New Double-Wall Fuel Injection Lines Group And Fuel Drain Group Available As Attachments For Protection Against Fuel Leakage{1252,1254,7400}
1983/06/20 Frequency Meter Failure; Make Sure It is Connected To The Correct Voltage{7471,7002}
1983/07/04 Prevent Damage To Brake Lining Before And During Installation{4254,4001}
1983/07/04 Improved Governor Control Shaft And Seal Will Help Prevent Oil Leakage{1265}
1983/07/04 Different Method Can Be Used To Take Oil Sample{5057,0372}
1983/07/04 New Tachometer Drive Group Adapter Assemblies Have A Larger Input Shaft{7462,7487}
1983/07/04 Damaged Lifter Bores In 3400 Series Engines Can Be Used Again{1201,0374}
1983/07/04 New Camshaft Gear Has More Resistance To Pitting{1210,1212}
1983/07/11 New Oil Pan Group Gives Easier Access To The Oil Drain Adapter{1302}
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.