Revised Service Manual For Electronic Modular Control Panel II (EMCP II) For EUI Engines is Now Available{7451,4490}
Usage:
3508 (5XM),
(3PS),
(3LS),
3508B (7SM),
(2BM),
(3DM),
(6PN),
(4GM),
(1TW),
(2HW),
3512 (6PM),
(3RS),
(3MS),
3512B (4TN),
(7HM),
(8EM),
(8RM),
(6WN),
(3ZW),
(4AW),
3516 (7KM),
(3NS),
3516B (8KN),
(8CN),
(9AN),
(7RN),
(6HN),
(3CW),
(1NW) Engines;
All SR4B Generator Sets with EUI Engines
Service Manual Module, SENR5398, Electronic Modular Control Panel II (EMCP II) For EUI Engines, has been revised and is now available. To obtain the revised manual, order form number SENR5398.
The revised manual, SENR5398-01, includes updated schematics, new information on optional modules, updated fault codes, and new test procedures for the charging system.
Caterpillar Information System:
1998/12/01 Service Manual Module For Electronic Modular Control Panel II+ On EUI Engines Now Available{7450,4490}
1998/12/01 Updated Owners Manual For Customer Communication Module (CCM) Available{1926}
1998/12/01 New Customer Communication Module Has Improved Communication Capabilities{1926}
1998/12/01 Change In Location And Size Of Crankshaft Counterweight Sequence Number{1231,1202}
1998/12/01 New Engine Lifting Eye Assembly {1122}
1998/12/01 New Piston Cooling Jet Tube Assemblies Provide Increased Piston Clearance For Engines With Gallery Cooled Pistons{1331}
1998/12/01 Eliminate Possibility Of Engine Oil Leaks From Oil Pan Bolt{1302}
1998/12/01 Be Sure To Use Correct Stub Shaft When Replacing Cam Idler Gear{1234,1212}
1998/12/01 New Remanufactured Water Pump Groups Available{1361}
1998/11/01 Two Bearing Close Coupled Gensets Experience A Noise In The Coupling During Engine Shut Down {4456}
1998/11/01 Special Instruction, REHS0345, "Generator Service Literature Index" Is Available {4450}
1998/11/01 Personality Module Alarm And Shutdown Settings {1902}
1998/12/01 New Exhaust Valve Lash Setting For G3600 Engines In Landfill Applications{1105}
1998/12/01 Electronic Actuator Group [Part Of The Hydraulic Actuator System (Hydrax)] Available For Parts Service{1908,1915}
1998/12/01 New Metal Particle Detector And New Metal Particle Detector Kit Available{7430}
1998/12/01 New Maintenance Information For Generators{4450}
1999/01/01 Use 150-3992 And 150-3993 Timing Pins For Fuel Injection Pumps Installation{1251,1251,1000}
1999/01/01 Camshaft And Follower Lubricant Recommended During Rebuild And Assembly Of Engines{1210,1211}
1999/01/01 New Gasket Used In Air Lines Group{1071}
1999/01/01 Use 154-9521 Spark Plug Seat Cleaner To Remove Debris From Gasket Seat And Cylinder Heads{1100,0703}
1999/01/01 New High Pressure Oil Hose Assembly Now Used{1307}
1999/01/01 Use 155-1536 Valve Recession Tool Kit To Determine Valve Wear{1103}
1999/01/01 Use 125-0201 Guide Assembly For Camshaft Installation {1202}
1999/01/01 Use 155-8795 Crankshaft Gauge To Determine Distortion And Bearing Alignment{1202}