Usage:
Start By:
a. Install steering frame lock pin. Refer to Disassembly and Assembly, "Steering Frame Lock Pin - Remove and Install" for the machine that is being serviced.
NOTE: The electronic control module is located inside the operator's station. Put identification marks on all connectors for installation purposes.
1. Loosen bolts (1).
2. Disconnect electrical connectors (2) from power train electronic control (3).
3. Remove four bolts (4).
4. Remove power train electronic control (3).
Installation Procedure
1. Install power train electronic control (3).
2. Install four bolts (4).
3. Connect electrical connectors (2) to power train electronic control (3).
4. Tighten bolts (1).
End By:
a. Remove steering frame lock pin. Refer to Disassembly and Assembly, "Steering Frame Lock Pin - Remove and Install" for the machine that is being serviced.