Differential and Bevel Gear
Usage:
SMCS Code:3258
(1) Torque for the 20 bolts ... 230 ± 40 N·m (170 ± 30 lb ft)
Plus an additional ... 120 ± 10°
(2) Torque for the 12 bolts ... 270 ± 40 N·m (200 ± 30 lb ft)
(3) Torque for the 12 bolts ... 270 ± 40 N·m (200 ± 30 lb ft)
(4) Use the following procedure in order to tighten the 24 bolts:
a. Apply 4C-9507Retaining Compound to the bolt threads prior to assembly.
b. Torque the 24 bolts to ... 230 ± 40 N·m (169 ± 29 lb ft)
c. Place an index mark on each bolt. Rotate each bolt in the clockwise direction an additional ... 60 degrees ± 10 degrees.
(5) Torque for the two 30 mm bolts on the bevel gear side ... 1800 ± 200 N·m (1325 ± 150 lb ft)
Torque for the two 24 mm bolts on the side opposite the bevel gear ... 900 ± 100 N·m (660 ± 75 lb ft)
Caterpillar Information System:
R1700G L.H.D. POWER TRAIN Oscillating Axle (Rear)
R1700G L.H.D. POWER TRAIN Fixed Axle (Front)
R1700G L.H.D. POWER TRAIN Drive Shafts
R1700G L.H.D. POWER TRAIN Drive Shafts
R1700G L.H.D. POWER TRAIN Transmission Mounting
R1700G L.H.D. POWER TRAIN Transmission Mounting
R1700G L.H.D. POWER TRAIN Transmission Selector and Pressure Control Valve
R1700G L.H.D. POWER TRAIN Speed Sensor (Transmission)
R1700G L.H.D. POWER TRAIN Power Train Electronic Control Pinout Specifications
R1700G L.H.D. POWER TRAIN Transmission Clutch Solenoid Valve
R1700G L.H.D. POWER TRAIN Transmission Hydraulic Control
R1700G L.H.D. POWER TRAIN Output Transfer Gears
R1700G L.H.D. POWER TRAIN Differential Backlash and Bearing Adjustment
R1700G L.H.D. POWER TRAIN Final Drive and Wheel
R1700G L.H.D. POWER TRAIN Wheel Bearing Adjustment
R1700G L.H.D. POWER TRAIN Rim Mounting
R1700G L.H.D. POWER TRAIN Cab Mounting (FOPS)
R1700G L.H.D. POWER TRAIN Cab Mounting (ROPS)
R1700G L.H.D. POWER TRAIN Systems Operation
R1700G L.H.D. POWER TRAIN Testing and Adjusting
R1700G L.H.D. POWER TRAIN Steering Frame Lock Pin - Remove and Install
R1700G L.H.D. POWER TRAIN Bucket Control Group Safety Pins - Remove and Install
R1700G L.H.D. POWER TRAIN Hydraulic System Pressure - Release
R1700G L.H.D. POWER TRAIN Electronic Control Module (Power Train) - Remove and Install