New Soot-Filter Available For Use With Air Cleaner Group {1055,1050}
Usage:
3606 (8RB582-Up),
3612 (9RC194-Up) Diesel Engines
Description of Change: A new soot-filter is available for use only with the air cleaner group on the above engines. This new soot-filter slips over the outside of the filter element in the air cleaner group. The use of this soot-filter will help extend the service life of the existing air cleaner element.
Adaptable To: The new 125-7774 Soot-Filter is available for use only with the 6I-1795 Air Cleaner Group used on the above engines.
Caterpillar Information System:
1996/09/23 Improved Air Cleaner Element Assembly Used {1054}
1996/09/23 Turbocharger Water Wash Procedure {1052}
1996/09/23 Caterpillar Now Has Parts Support For Previously Non-Supported Custom Parts {7567}
1996/09/23 Introduction Of New Spark Ignited Single-Cylinder Gasket Kits {7555}
1996/09/23 New Circuit Board Assembly And Modules Improve Serviceability And Reliability {1418,1550}
1996/09/23 New Bracket Available To Support Gas Engine Ignition Group Wiring Harness Assembly {1408,1550}
1996/09/23 Addition Of Sleeve And Removal Of Setscrew Prevents Binding Of Control Shaft {1266,7558}
1996/09/23 New Valve Cover Seals Are Available For Mechanical Unit Injector (MUI) and Electronic Unit Injector (EUI) Engines {1107}
1996/09/23 A Chamfer Has Been Added To Some Engine Cylinder Head Bolt Holes To Help Reduce Stress Concentrations And Prevent Cracks {1101}
1996/09/23 Replacement Turbocharger Cartridge Part Numbers {1056}
1996/09/23 Error In The Testing And Adjusting Manuals For Fuel System Adjustment Timing Pin {1272}
1996/09/23 New Mixer Assembly Provides Better Startability And Idle Stability {1266}
1996/09/23 New Wastegate Shaft And Bushing Provides Better Wear Resistance {1057}
1996/09/23 New Rotocoil Assembly Used In Valve Rocker Arm Groups {1109}
1996/09/23 Caterpillar High Efficiency Fuel Filters Help Provide Maximum Fuel Pump And Fuel Injector Life {1261}
1996/09/23 New Clamp Assembly Used In Engine Oil Lines Groups {1307}
1996/09/23 Procedure To Install A Protective Fuse For Slave Relay Number 1 In The Engine Supervisory System (ESS) Panel {1900}
1996/09/23 Recommended Customer Communications Module (CCM) Electrical Power Source {1926}
1996/09/23 Help Available For PC Based Service Tools Used For All Electronic Engines {1902}
1996/10/01 Improved Breather Vent Helps Prevent Water Entry Into Altronic III Magnetos{1552}
1996/10/01 Improved Marine Engine Inlet Valves{1105}
1996/10/01 Improvements To Prevent Water From Entering The Flywheel Housing{1157}
1996/10/01 Three Ring Piston Body Assembly Available To Replace The Two Ring Piston Body Assembly{1214}
1996/10/01 An Improved O-Ring Seal And Proper Use Of Adapter Locks Reduces Oil Leaks{1252}