Updated Cylinder Block Front Housing Gaskets are Now Used on Certain C27 and C32 Engines {1151, 1162, 7555}
- Generator Set
- C27 GEN SET (S/N: N1B1-371)
- C32 GEN SET (S/N: JSJ1-4059,92001-92010)
- Industrial Engine
- C27 INDUSTRIAL (S/N: RAM1-315; TWM1-6797,81002-81017,82001-82004)
- C32 INDUSTRIAL (S/N: TLD1-2012,20119-20119,81001-81003,83001-83002)
- Marine Engine
- C32 MARINE (S/N: RNC1-3198; RPM1-1102; SDN1-1866; T3T1-383; RNY1-2818,81001-81004; RNZ1-1406)
Description Of Change: The updated cylinder block front housing gasket is more durable for improved sealing capacity.
Adaptable To: The following changes are adaptable to the products within the listed serial numbers, and are effective with all products after the listed serial numbers.
Note: The updated gasket can be identified by locating tab shown in Illustration 1.
The part numbers are listed in Table 1.
Show/hide table
| Part Number | Part Name | Qty |
|---|---|---|
| Cylinder Block Gasket | 1 | |
| Gasket | 1 |
Show/hide table
| |
| Illustration 1 | g06373254 |
Caterpillar Information System:
Improved Oil Filter Base Assembly is Now Used on Certain C7 Machine Engines {1306, 1308} Improved Oil Filter Base Assembly is Now Used on Certain C7 Machine Engines {1306, 1308}
Improved Oil Filter Base Assembly is Now Used on Certain C7 Engines {1306} Improved Oil Filter Base Assembly is Now Used on Certain C7 Engines {1306}
C27 and C32 Generator Set Engines Flywheel Housing - Remove and Install
140 Motor Grader Machine Systems Blower Motor (Air Conditioner and Heater) - Remove and Install
140 Motor Grader Machine Systems Seat - Remove and Install
Procedure for Installing the Product LinkTM PL631/PLE631 Is Now Available for Certain 374 and 390 Excavators, Mobile Hydraulic Power Units, and OEM Excavator Based Speciality Solutions {7606} Procedure for Installing the Product LinkTM PL631/PLE631 Is Now Available for Certain 374 and 390 Excavators, Mobile Hydraulic Power Units, and OEM Excavator Based Speciality Solutions {7606}
120 and 120 AWD Motor Grader Fuel System - Fill
120 and 120 AWD Motor Grader Stopping the Engine
120 and 120 AWD Motor Grader Mirror - If Equipped
307.5, 308, 308.5, 309, and 310 Mini Hydraulic Excavators Restricted Visibility
140 Motor Grader Electrical Troubleshooting Operator Control Switch (Switch to Ground) - Test
140 Motor Grader Electrical Troubleshooting Electrical Power Supply - Test
A New Service Replacement Hose Is Now Available for Certain Seat Suspensions {7324} A New Service Replacement Hose Is Now Available for Certain Seat Suspensions {7324}
140 Motor Grader Electrical Troubleshooting Relay - Test
140 Motor Grader Electrical Troubleshooting Sensor (Data Link Type) - Test
Axial Clearances of Front Pins Are Now Improved on Certain 320, 320 GCand 323 Excavators {5057, 6501, 6502} Axial Clearances of Front Pins Are Now Improved on Certain 320, 320 GCand 323 Excavators {5057, 6501, 6502}
Improved Integrated Voltage Regulator (IVR) Configuration is Now Available for Certain Cat® Engines {1410} Improved Integrated Voltage Regulator (IVR) Configuration is Now Available for Certain Cat® Engines {1410}
140 Motor Grader Electrical Troubleshooting Sensor Signal (Analog, Passive) - Test
C175-16 Generator Set Aftertreatment System - Inspect
140 Motor Grader Electrical Troubleshooting Sensor Signal (PWM) - Test
C4.4 Engines for Caterpillar Built Machines Fuel Injection - Engines with a Primary and Secondary Fuel Filter Base
Three60 Precision Controller Gen II Engine Warm Up Using Direction Disable Mode
New Software Is Now Used on Certain G3600 Engines {1920} New Software Is Now Used on Certain G3600 Engines {1920}
New Valve Bridge Design is Now Available for Certain G3400 Series Engines {1100, 1121} New Valve Bridge Design is Now Available for Certain G3400 Series Engines {1100, 1121}