New Valve Bridge Design is Now Available for Certain G3400 Series Engines {1100, 1121}
- Engine
- G3408 (S/N: 6NB1-UP; 6RJ1-UP)
- G3408C (S/N: BAZ1-UP)
- G3412 (S/N: GNA1-UP; 7DB1-UP; KAP1-UP)
- G3412C (S/N: 6ZM1-UP; SPY1-UP)
- G3408C (S/N: BAZ1-UP)
The new valve bridge is of floating type. It is acceptable to install guided bridge head and a floating bridge head on the same engine.
Note: When changing any part from the former (guided) to new (floating) bridge design, valve and bridge both must be of the new design. When ordering cylinder heads, new floating bridges must also be ordered.
The new and former part numbers are listed in Table 1.
Show/hide table
Required Parts | ||
---|---|---|
New Part Number | Part Name | Former Part Number(1) |
Cylinder Head Gp | ||
Cylinder Head Gp | ||
Exhaust Valve | ||
Inlet Valve | ||
Valve Seat | ||
Cylinder Head As | ||
Valve Bridge | ||
Show/hide table
(1) | The former part number listed is for reference only and may differ. |
The effective serial numbers are listed in Table 2.
Show/hide table
Effective Serial Numbers |
---|
S/N:6NB05168-UP |
S/N:6RJ02223-UP |
S/N:BAZ02676-UP |
S/N:GNA00145-UP |
S/N:7DB04039-UP |
S/N:KAP01117-UP |
S/N:6ZM03031-UP |
S/N:SPY00187-UP |
Caterpillar Information System:
New Software Is Now Used on Certain G3600 Engines {1920} New Software Is Now Used on Certain G3600 Engines {1920}
Three60 Precision Controller Gen II Engine Warm Up Using Direction Disable Mode
C4.4 Engines for Caterpillar Built Machines Fuel Injection - Engines with a Primary and Secondary Fuel Filter Base
140 Motor Grader Electrical Troubleshooting Sensor Signal (PWM) - Test
C175-16 Generator Set Aftertreatment System - Inspect
140 Motor Grader Electrical Troubleshooting Sensor Signal (Analog, Passive) - Test
Improved Integrated Voltage Regulator (IVR) Configuration is Now Available for Certain Cat® Engines {1410} Improved Integrated Voltage Regulator (IVR) Configuration is Now Available for Certain Cat® Engines {1410}
Axial Clearances of Front Pins Are Now Improved on Certain 320, 320 GCand 323 Excavators {5057, 6501, 6502} Axial Clearances of Front Pins Are Now Improved on Certain 320, 320 GCand 323 Excavators {5057, 6501, 6502}
140 Motor Grader Electrical Troubleshooting Sensor (Data Link Type) - Test
140 Motor Grader Electrical Troubleshooting Relay - Test
A New Service Replacement Hose Is Now Available for Certain Seat Suspensions {7324} A New Service Replacement Hose Is Now Available for Certain Seat Suspensions {7324}
Updated Cylinder Block Front Housing Gaskets are Now Used on Certain C27 and C32 Engines {1151, 1162, 7555} Updated Cylinder Block Front Housing Gaskets are Now Used on Certain C27 and C32 Engines {1151, 1162, 7555}
New Software is Now Used on Certain 3500E Marine Engines {1920} New Software is Now Used on Certain 3500E Marine Engines {1920}
Three60 Precision Controller Gen II Maintenance Interval Schedule
C27 and C32 Generator Set Engines Gear Group (Rear) - Install
G3512 Gas Engine Cylinder Head
140 Motor Grader Electrical Troubleshooting Sensor Supply - Test
140 Motor Grader Electrical Troubleshooting Solenoid Return - Test
New Pilot Lines Group Is Now Available For Certain 390F Excavators {5057, 5059} New Pilot Lines Group Is Now Available For Certain 390F Excavators {5057, 5059}
120 and 120 AWD Motor Grader Capacities (Refill)
140 Motor Grader Electrical Troubleshooting Solenoid Valve - Test
C27 and C32 Generator Set Engines Engine Oil Pan - Remove and Install
A New Connector is Used on Certain C175 Engines for the Low-Pressure Fuel System {1274} A New Connector is Used on Certain C175 Engines for the Low-Pressure Fuel System {1274}
140 Motor Grader Electrical Troubleshooting Speed Sensor - Test