Engine Warm Up Using Direction Disable Mode
Note: The direction disable feature can be used any time that engine speed above idle is required while keeping the transmission in neutral. The engine speed can be varied from minimum to maximum.
- Press and hold the “Station Select” button while moving the levers in either the forward or reverse direction.
- Set the desired engine speed by positioning the levers.
- When the engine is warm, return the levers to the “neutral” position.
- Release the Station Select button.
Show/hide table
| NOTICE |
|---|
|
When the lever is turned to the neutral position from the Direction Disable Mode, the power train control resets and normal operation resumes. That is, the transmission shifts when the lever is moved in the forward or in the reverse direction without pressing and holding the Station Select button. |
Caterpillar Information System:
C4.4 Engines for Caterpillar Built Machines Fuel Injection - Engines with a Primary and Secondary Fuel Filter Base
140 Motor Grader Electrical Troubleshooting Sensor Signal (PWM) - Test
C175-16 Generator Set Aftertreatment System - Inspect
140 Motor Grader Electrical Troubleshooting Sensor Signal (Analog, Passive) - Test
Improved Integrated Voltage Regulator (IVR) Configuration is Now Available for Certain Cat® Engines {1410} Improved Integrated Voltage Regulator (IVR) Configuration is Now Available for Certain Cat® Engines {1410}
Axial Clearances of Front Pins Are Now Improved on Certain 320, 320 GCand 323 Excavators {5057, 6501, 6502} Axial Clearances of Front Pins Are Now Improved on Certain 320, 320 GCand 323 Excavators {5057, 6501, 6502}
140 Motor Grader Electrical Troubleshooting Sensor (Data Link Type) - Test
140 Motor Grader Electrical Troubleshooting Relay - Test
A New Service Replacement Hose Is Now Available for Certain Seat Suspensions {7324} A New Service Replacement Hose Is Now Available for Certain Seat Suspensions {7324}
Updated Cylinder Block Front Housing Gaskets are Now Used on Certain C27 and C32 Engines {1151, 1162, 7555} Updated Cylinder Block Front Housing Gaskets are Now Used on Certain C27 and C32 Engines {1151, 1162, 7555}
Improved Oil Filter Base Assembly is Now Used on Certain C7 Machine Engines {1306, 1308} Improved Oil Filter Base Assembly is Now Used on Certain C7 Machine Engines {1306, 1308}
Improved Oil Filter Base Assembly is Now Used on Certain C7 Engines {1306} Improved Oil Filter Base Assembly is Now Used on Certain C7 Engines {1306}
New Software Is Now Used on Certain G3600 Engines {1920} New Software Is Now Used on Certain G3600 Engines {1920}
New Valve Bridge Design is Now Available for Certain G3400 Series Engines {1100, 1121} New Valve Bridge Design is Now Available for Certain G3400 Series Engines {1100, 1121}
New Software is Now Used on Certain 3500E Marine Engines {1920} New Software is Now Used on Certain 3500E Marine Engines {1920}
Three60 Precision Controller Gen II Maintenance Interval Schedule
C27 and C32 Generator Set Engines Gear Group (Rear) - Install
G3512 Gas Engine Cylinder Head
140 Motor Grader Electrical Troubleshooting Sensor Supply - Test
140 Motor Grader Electrical Troubleshooting Solenoid Return - Test
New Pilot Lines Group Is Now Available For Certain 390F Excavators {5057, 5059} New Pilot Lines Group Is Now Available For Certain 390F Excavators {5057, 5059}
120 and 120 AWD Motor Grader Capacities (Refill)
140 Motor Grader Electrical Troubleshooting Solenoid Valve - Test
C27 and C32 Generator Set Engines Engine Oil Pan - Remove and Install