Improved Oil Filter Base Assembly is Now Used on Certain C7 Engines {1306}
- Engine
- 3126B (S/N: BEJ1-81001; DCS1-81003; BDZ1-3199)
- C7 (S/N: TB21-102; JRA1-81001; JTF1-81006; RMF1-14193; TEF1-1084; RRH1-145; M4K1-140; FML1-38109; FMM1-54313; JRT1-3106; PGZ1-165)
- Petroleum Engine
- C7 PETROLEUM (S/N: P7L1-157; C7P1-313)
Description Of Change: The oil filter base assembly has improved durability to prevent cracking.
Adaptable To: The following changes are adaptable to the products within the listed serial numbers, and are effective with all products after the listed serial numbers.
Table 1 contains the part number for this change.
Show/hide table
Part Number | Part Name | Quantity |
---|---|---|
Oil Filter Base As | 1 |
Caterpillar Information System:
C27 and C32 Generator Set Engines Flywheel Housing - Remove and Install
140 Motor Grader Machine Systems Blower Motor (Air Conditioner and Heater) - Remove and Install
140 Motor Grader Machine Systems Seat - Remove and Install
Procedure for Installing the Product LinkTM PL631/PLE631 Is Now Available for Certain 374 and 390 Excavators, Mobile Hydraulic Power Units, and OEM Excavator Based Speciality Solutions {7606} Procedure for Installing the Product LinkTM PL631/PLE631 Is Now Available for Certain 374 and 390 Excavators, Mobile Hydraulic Power Units, and OEM Excavator Based Speciality Solutions {7606}
120 and 120 AWD Motor Grader Fuel System - Fill
120 and 120 AWD Motor Grader Stopping the Engine
120 and 120 AWD Motor Grader Mirror - If Equipped
307.5, 308, 308.5, 309, and 310 Mini Hydraulic Excavators Restricted Visibility
140 Motor Grader Electrical Troubleshooting Operator Control Switch (Switch to Ground) - Test
140 Motor Grader Electrical Troubleshooting Electrical Power Supply - Test
140 Motor Grader Electrical Troubleshooting Electrical Connector - Inspect
Grease May Leak from the Grease Fitting on Certain 320 GC, 320 and 323 Excavators {5456, 5457, 5458, 6502, 6513, 7063, 7510} Grease May Leak from the Grease Fitting on Certain 320 GC, 320 and 323 Excavators {5456, 5457, 5458, 6502, 6513, 7063, 7510}
Improved Oil Filter Base Assembly is Now Used on Certain C7 Machine Engines {1306, 1308} Improved Oil Filter Base Assembly is Now Used on Certain C7 Machine Engines {1306, 1308}
Updated Cylinder Block Front Housing Gaskets are Now Used on Certain C27 and C32 Engines {1151, 1162, 7555} Updated Cylinder Block Front Housing Gaskets are Now Used on Certain C27 and C32 Engines {1151, 1162, 7555}
A New Service Replacement Hose Is Now Available for Certain Seat Suspensions {7324} A New Service Replacement Hose Is Now Available for Certain Seat Suspensions {7324}
140 Motor Grader Electrical Troubleshooting Relay - Test
140 Motor Grader Electrical Troubleshooting Sensor (Data Link Type) - Test
Axial Clearances of Front Pins Are Now Improved on Certain 320, 320 GCand 323 Excavators {5057, 6501, 6502} Axial Clearances of Front Pins Are Now Improved on Certain 320, 320 GCand 323 Excavators {5057, 6501, 6502}
Improved Integrated Voltage Regulator (IVR) Configuration is Now Available for Certain Cat® Engines {1410} Improved Integrated Voltage Regulator (IVR) Configuration is Now Available for Certain Cat® Engines {1410}
140 Motor Grader Electrical Troubleshooting Sensor Signal (Analog, Passive) - Test
C175-16 Generator Set Aftertreatment System - Inspect
140 Motor Grader Electrical Troubleshooting Sensor Signal (PWM) - Test
C4.4 Engines for Caterpillar Built Machines Fuel Injection - Engines with a Primary and Secondary Fuel Filter Base
Three60 Precision Controller Gen II Engine Warm Up Using Direction Disable Mode