Seat - Remove and Install
- Turn the battery disconnect switch to the OFF position.
Show/hide table
Illustration 1 g06372152 - Fold seat (1). Remove three bolts (2), repeat for opposite side.
Show/hide table
Illustration 2 g06372160 - Disconnect harness (3).
- Use two people to remove seat (1). The approximate weight of the seat is
34 kg (75 lb)
- Install seat (1) in the reverse order of removal.
Caterpillar Information System:
Procedure for Installing the Product LinkTM PL631/PLE631 Is Now Available for Certain 374 and 390 Excavators, Mobile Hydraulic Power Units, and OEM Excavator Based Speciality Solutions {7606} Procedure for Installing the Product LinkTM PL631/PLE631 Is Now Available for Certain 374 and 390 Excavators, Mobile Hydraulic Power Units, and OEM Excavator Based Speciality Solutions {7606}
120 and 120 AWD Motor Grader Fuel System - Fill
120 and 120 AWD Motor Grader Stopping the Engine
120 and 120 AWD Motor Grader Mirror - If Equipped
307.5, 308, 308.5, 309, and 310 Mini Hydraulic Excavators Restricted Visibility
140 Motor Grader Electrical Troubleshooting Operator Control Switch (Switch to Ground) - Test
140 Motor Grader Electrical Troubleshooting Electrical Power Supply - Test
140 Motor Grader Electrical Troubleshooting Electrical Connector - Inspect
Grease May Leak from the Grease Fitting on Certain 320 GC, 320 and 323 Excavators {5456, 5457, 5458, 6502, 6513, 7063, 7510} Grease May Leak from the Grease Fitting on Certain 320 GC, 320 and 323 Excavators {5456, 5457, 5458, 6502, 6513, 7063, 7510}
120 and 120 AWD Motor Grader Hydraulic System Oil Sample - Obtain
120 and 120 AWD Motor Grader Hydraulic System Oil - Change
Improved Installation Process for Securing the Sensing Wires is Now Available for Certain C27 and C32 Generator Set Engines {1404, 1408, 4459} Improved Installation Process for Securing the Sensing Wires is Now Available for Certain C27 and C32 Generator Set Engines {1404, 1408, 4459}
140 Motor Grader Machine Systems Blower Motor (Air Conditioner and Heater) - Remove and Install
C27 and C32 Generator Set Engines Flywheel Housing - Remove and Install
Improved Oil Filter Base Assembly is Now Used on Certain C7 Engines {1306} Improved Oil Filter Base Assembly is Now Used on Certain C7 Engines {1306}
Improved Oil Filter Base Assembly is Now Used on Certain C7 Machine Engines {1306, 1308} Improved Oil Filter Base Assembly is Now Used on Certain C7 Machine Engines {1306, 1308}
Updated Cylinder Block Front Housing Gaskets are Now Used on Certain C27 and C32 Engines {1151, 1162, 7555} Updated Cylinder Block Front Housing Gaskets are Now Used on Certain C27 and C32 Engines {1151, 1162, 7555}
A New Service Replacement Hose Is Now Available for Certain Seat Suspensions {7324} A New Service Replacement Hose Is Now Available for Certain Seat Suspensions {7324}
140 Motor Grader Electrical Troubleshooting Relay - Test
140 Motor Grader Electrical Troubleshooting Sensor (Data Link Type) - Test
Axial Clearances of Front Pins Are Now Improved on Certain 320, 320 GCand 323 Excavators {5057, 6501, 6502} Axial Clearances of Front Pins Are Now Improved on Certain 320, 320 GCand 323 Excavators {5057, 6501, 6502}
Improved Integrated Voltage Regulator (IVR) Configuration is Now Available for Certain Cat® Engines {1410} Improved Integrated Voltage Regulator (IVR) Configuration is Now Available for Certain Cat® Engines {1410}
140 Motor Grader Electrical Troubleshooting Sensor Signal (Analog, Passive) - Test
C175-16 Generator Set Aftertreatment System - Inspect