140 Motor Grader Machine Systems Caterpillar


Blower Motor (Air Conditioner and Heater) - Remove and Install

Usage:

140 N94

Removal Procedures

Start By:

  1. Remove the seat


    Illustration 1g06372207

  1. Remove covers (1).


    Illustration 2g06372286

  2. Disconnect harness assemblies (2), (3), and (5).

  3. Remove the nut and clip (4).


    Illustration 3g06372294

  4. Remove three nuts (6). Remove Blower Motor (Air Conditioner and Heater) (7).

Installation Procedure

  1. Install Blower Motor (Air Conditioner and Heater) (7) in the reverse order of removal.

Caterpillar Information System:

140 Motor Grader Machine Systems Seat - Remove and Install
Procedure for Installing the Product LinkTM PL631/PLE631 Is Now Available for Certain 374 and 390 Excavators, Mobile Hydraulic Power Units, and OEM Excavator Based Speciality Solutions {7606} Procedure for Installing the Product LinkTM PL631/PLE631 Is Now Available for Certain 374 and 390 Excavators, Mobile Hydraulic Power Units, and OEM Excavator Based Speciality Solutions {7606}
120 and 120 AWD Motor Grader Fuel System - Fill
120 and 120 AWD Motor Grader Stopping the Engine
120 and 120 AWD Motor Grader Mirror - If Equipped
307.5, 308, 308.5, 309, and 310 Mini Hydraulic Excavators Restricted Visibility
140 Motor Grader Electrical Troubleshooting Operator Control Switch (Switch to Ground) - Test
140 Motor Grader Electrical Troubleshooting Electrical Power Supply - Test
140 Motor Grader Electrical Troubleshooting Electrical Connector - Inspect
Grease May Leak from the Grease Fitting on Certain 320 GC, 320 and 323 Excavators {5456, 5457, 5458, 6502, 6513, 7063, 7510} Grease May Leak from the Grease Fitting on Certain 320 GC, 320 and 323 Excavators {5456, 5457, 5458, 6502, 6513, 7063, 7510}
120 and 120 AWD Motor Grader Hydraulic System Oil Sample - Obtain
120 and 120 AWD Motor Grader Hydraulic System Oil - Change
C27 and C32 Generator Set Engines Flywheel Housing - Remove and Install
Improved Oil Filter Base Assembly is Now Used on Certain C7 Engines {1306} Improved Oil Filter Base Assembly is Now Used on Certain C7 Engines {1306}
Improved Oil Filter Base Assembly is Now Used on Certain C7 Machine Engines {1306, 1308} Improved Oil Filter Base Assembly is Now Used on Certain C7 Machine Engines {1306, 1308}
Updated Cylinder Block Front Housing Gaskets are Now Used on Certain C27 and C32 Engines {1151, 1162, 7555} Updated Cylinder Block Front Housing Gaskets are Now Used on Certain C27 and C32 Engines {1151, 1162, 7555}
A New Service Replacement Hose Is Now Available for Certain Seat Suspensions {7324} A New Service Replacement Hose Is Now Available for Certain Seat Suspensions {7324}
140 Motor Grader Electrical Troubleshooting Relay - Test
140 Motor Grader Electrical Troubleshooting Sensor (Data Link Type) - Test
Axial Clearances of Front Pins Are Now Improved on Certain 320, 320 GCand 323 Excavators {5057, 6501, 6502} Axial Clearances of Front Pins Are Now Improved on Certain 320, 320 GCand 323 Excavators {5057, 6501, 6502}
Improved Integrated Voltage Regulator (IVR) Configuration is Now Available for Certain Cat® Engines {1410} Improved Integrated Voltage Regulator (IVR) Configuration is Now Available for Certain Cat® Engines {1410}
140 Motor Grader Electrical Troubleshooting Sensor Signal (Analog, Passive) - Test
C175-16 Generator Set Aftertreatment System - Inspect
140 Motor Grader Electrical Troubleshooting Sensor Signal (PWM) - Test
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.