Electric Starting Motor - Remove and Install
Show/hide table
Accidental engine starting can cause injury or death to personnel working on the equipment. To avoid accidental engine starting, disconnect the battery cable from the negative (−) battery terminal. Completely tape all metal surfaces of the disconnected battery cable end in order to prevent contact with other metal surfaces which could activate the engine electrical system. Place a Do Not Operate tag at the Start/Stop switch location to inform personnel that the equipment is being worked on. |
- Disconnect customer supplied harness assemblies on electric starting motor.
Show/hide table
Illustration 1 g06358313 - Attach a suitable lifting device to electric starting motor (1). The weight of electric starting motor (1) is approximately
37 kg (82 lb) . - Remove bolts (2) and electric starting motor (1).
Show/hide table
Illustration 2 g06358322 - Remove gasket (3).
- Install electric starting motor (1) in the reverse order of removal.
Caterpillar Information System:
307.5, 308, 308.5, 309, and 310 Mini Hydraulic Excavator Machine Systems Solenoid Valve (Work Tool) - Remove and Install
Portable Aqueous Based Parts Cleaners, Models 482-9830, 482-9831, and 482-9832 {0374, 0599, 0680, 0699} Portable Aqueous Based Parts Cleaners, Models 482-9830, 482-9831, and 482-9832 {0374, 0599, 0680, 0699}
797F Tier 4 Off-Highway Truck Field Assembly Exhaust - Install
307.5, 308, 308.5, 309, and 310 Mini Hydraulic Excavator Machine Systems Stick Cylinder - Remove and Install
3512E Land Electric Drive Air Inlet Filter - Inspect/Clean/Test
320 GC, 320 and 323 Excavator Maintenance Interval Schedule
307.5, 308, 308.5, 309, and 310 Mini Hydraulic Excavator Engine Supplement Fuel Filter and Water Separator - Remove and Install
Repair Procedure for the Door Window Group on Next Generation Hydraulic Excavators {7308, 7310} Repair Procedure for the Door Window Group on Next Generation Hydraulic Excavators {7308, 7310}
307.5, 308, 308.5, 309, and 310 Mini Hydraulic Excavator Machine Systems Bucket Cylinder - Remove and Install
C9.3 Industrial Engine Diesel Particulate Filter Regeneration
C15 and C18 Industrial Engines Diesel Particulate Filter Regeneration
797 Off-Highway Truck Wheel Adapter - Inspect
797F Tier 4 Off-Highway Truck Field Assembly Body and Canopy - Install - Standard
797F Tier 4 Off-Highway Truck Field Assembly Body and Canopy - Install
PM620, PM622, PM820 and PM822 and PM825 Cold Planer Machine Systems Display Module
New Software Is Now Available for all Cat® Object Detection and Vision Applications On Certain Cat® Products {7610, 7620} New Software Is Now Available for all Cat® Object Detection and Vision Applications On Certain Cat® Products {7610, 7620}
Installation Procedure to Retrofit a PL522 or PL523 With a Pro Product Link PL641 or PL631 or PL542 System {7606} Installation Procedure to Retrofit a PL522 or PL523 With a Pro Product Link PL641 or PL631 or PL542 System {7606}
A New Special Instruction for Installation Procedure to Retrofit a PL522 or PL523 With a Pro Product Link PL641 or PL631 or PL542 Systems is Now Available {7606} A New Special Instruction for Installation Procedure to Retrofit a PL522 or PL523 With a Pro Product Link PL641 or PL631 or PL542 Systems is Now Available {7606}
307.5, 308, 308.5, 309, and 310 Mini Hydraulic Excavator Machine Systems Heating and Air Conditioning Unit - Remove and Install
307.5, 308, 308.5, 309, and 310 Mini Hydraulic Excavator Machine Systems Evaporator Coil - Remove and Install
797F and 797F XQ Off-Highway Trucks Machine Systems Fuel Cooler - Remove and Install
G3512 Generator Set Engine Air Inlet Manifold - Remove and Install
G3512 Generator Set Engine Exhaust Manifold Shield - Remove and Install
140 Motor Grader Machine Systems Cab - Remove and Install