C175 Tier 4 Final Engines for Caterpillar Built Machines Caterpillar


Gear Group (Rear) - Remove

Usage:

793F D3T

Removal Procedure

Table 1
Required Tools 
Tool  Part Number  Part Description  Qty. 
1P-0510  Driver Gp 

Start By:

  1. Remove the flywheel housing.


    Illustration 1g06339739

  1. Remove four bolts (1) and cover (2).


    Illustration 2g06339748

  2. Remove idler gear assembly (3).


    Illustration 3g06339801

  3. Use Tooling (A) and a suitable press to remove sleeve bearing (4).


    Illustration 4g06339817

  4. Remove 11 bolts (5) and shaft assembly (6).


    Illustration 5g06339829

  5. Remove 21 bolts (7) and crankshaft gear (8).

Caterpillar Information System:

120 Motor Graders Articulation Cylinder
320 GC, 320 and 323 Excavator Machine Systems Specifications Boom Cylinder Lines
140 Motor Grader Engine Supplement Diesel Exhaust Fluid Tank - Remove and Install
320 GC, 320 and 323 Excavator Machine Systems Specifications Boom Cylinder
140 Motor Graders Window Wipers
320 GC, 320 and 323 Excavator Machine Systems Specifications Boom Lines
120 Motor Graders Wheel Lean Cylinder and Mounting
140 Motor Grader Engine Supplement Nozzle Heater Harness - Remove and Install
140 Motor Grader Engine Supplement Pressure Sensor (ARD Combustion Air) - Remove and Install
301.5,301.6,301.7,301.8,302 Mini Hydraulic Excavator Machine Systems Undercarriage Cylinder (Adjustable Gauge) - Assemble
140 Motor Grader Engine Supplement Temperature Sensor (DPF Inlet, Flame Detect) - Remove and Install
301.5,301.6,301.7,301.8,302 Mini Hydraulic Excavator Machine Systems Undercarriage Cylinder (Adjustable Gauge) - Disassemble
140 Motor Grader Machine Systems Fuel Tank - Remove and Install
301.5, 301.6, 301.7 CR, 301.8 and 302 CR Mini Hydraulic Excavator System Schematic
New Configuration Files are Now Available for Certain Cat® Generator Set Engines Equipped with Comap and DEIF Controllers {7610, 7620} New Configuration Files are Now Available for Certain Cat® Generator Set Engines Equipped with Comap and DEIF Controllers {7610, 7620}
New Software Is Now Available on Certain 320 GC, 320, 323, 336 GC and 336 Excavators {7610, 7620} New Software Is Now Available on Certain 320 GC, 320, 323, 336 GC and 336 Excavators {7610, 7620}
Updated Current Transformer (CT) Ratio Values are Now Used On Certain Cat® Generator Set Engines {4476, 4490} Updated Current Transformer (CT) Ratio Values are Now Used On Certain Cat® Generator Set Engines {4476, 4490}
C175 Tier 4 Final Engines for Caterpillar Built Machines Gear Group (Rear) - Install
140 Motor Graders Accumulator Charging Valve
140 Motor Graders Air Conditioner
797F Tier 4 Off-Highway Truck Engine Supplement Engine Trunnion - Remove and Install
320 GC, 320 and 323 Excavator Machine Systems Specifications Pilot Lines
140 Motor Grader Engine Supplement Diesel Exhaust Fluid Pump - Remove and Install
140 Motor Grader Machine Systems Accumulator (Blade Cushion) - Remove and Install
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.