Gear Group (Rear) - Install
Show/hide table
| Required Tools | |||
| Tool | Part Number | Part Description | Qty. |
| A | 1P-0510 | Driver Gp | - |
Note: Install all gears with timing marks aligned.
- Position crankshaft gear (8) in a position to align timing mark with idler gear (3).
- Install 21 bolts (7).
- Tighten 21 bolts (7) to a torque of
120 ± 20 N·m (89 ± 15 lb ft) .
Show/hide table
Illustration 2 g06339817 - Tighten 21 bolts (7) to a torque of
- Position shaft assembly (6) and install 11 bolts (5).
Show/hide table
Illustration 3 g06339801 - Use Tooling (A) and a suitable press to install sleeve bearing (4).
Show/hide table
Illustration 4 g06339748 - Position idler gear assembly (3) so that timing marks align.
Show/hide table
Illustration 5 g06339739 - Position cover (2) and install four bolts (1).
Show/hide table
| |
| Illustration 1 | g06339829 |
End By:
- Install flywheel cover.
Caterpillar Information System:
Updated Current Transformer (CT) Ratio Values are Now Used On Certain Cat® Generator Set Engines {4476, 4490} Updated Current Transformer (CT) Ratio Values are Now Used On Certain Cat® Generator Set Engines {4476, 4490}
New Software Is Now Available on Certain 320 GC, 320, 323, 336 GC and 336 Excavators {7610, 7620} New Software Is Now Available on Certain 320 GC, 320, 323, 336 GC and 336 Excavators {7610, 7620}
New Configuration Files are Now Available for Certain Cat® Generator Set Engines Equipped with Comap and DEIF Controllers {7610, 7620} New Configuration Files are Now Available for Certain Cat® Generator Set Engines Equipped with Comap and DEIF Controllers {7610, 7620}
301.5, 301.6, 301.7 CR, 301.8 and 302 CR Mini Hydraulic Excavator System Schematic
140 Motor Grader Machine Systems Fuel Tank - Remove and Install
C175 Tier 4 Final Engines for Caterpillar Built Machines Gear Group (Rear) - Remove
120 Motor Graders Articulation Cylinder
320 GC, 320 and 323 Excavator Machine Systems Specifications Boom Cylinder Lines
140 Motor Grader Engine Supplement Diesel Exhaust Fluid Tank - Remove and Install
320 GC, 320 and 323 Excavator Machine Systems Specifications Boom Cylinder
140 Motor Graders Window Wipers
320 GC, 320 and 323 Excavator Machine Systems Specifications Boom Lines
140 Motor Graders Accumulator Charging Valve
140 Motor Graders Air Conditioner
797F Tier 4 Off-Highway Truck Engine Supplement Engine Trunnion - Remove and Install
320 GC, 320 and 323 Excavator Machine Systems Specifications Pilot Lines
140 Motor Grader Engine Supplement Diesel Exhaust Fluid Pump - Remove and Install
140 Motor Grader Machine Systems Accumulator (Blade Cushion) - Remove and Install
320 GC, 320 and 323 Excavator Machine Systems Specifications Swing Drive Mounting
New Cylinder Liner is Now Used on Certain C32 Engines {1216} New Cylinder Liner is Now Used on Certain C32 Engines {1216}
140 Motor Graders Front Axle (All Wheel Drive)
320 GC, 320 and 323 Excavator Machine Systems Specifications Swing Drive
New Console Storage Cover Is Now Available for Certain 320, 320GC, and 323 Excavators {5258} New Console Storage Cover Is Now Available for Certain 320, 320GC, and 323 Excavators {5258}
307.5, 308, 308.5, 309, and 310 Mini Hydraulic Excavator Machine System General Information