120 Motor Graders Caterpillar


Articulation Cylinder

Usage:

120 E92


Illustration 1g06339560

Table 1
Item  Qty  Part  Specification Description 
167-2192 Buffer Seal As  Lubricate lightly with the lubricant that is being sealed. 
167-2302 U-Cup Seal  Lubricate lightly with the lubricant that is being sealed. 
227-1143 Wiper Seal  Lubricate lightly with the lubricant that is being sealed. 
Before assembly, apply green Loctite 601 to the wiper seal groove. 
D1  137-8130 Piston  Bore over two lands is 82.05 ± 0.03 mm (3.230 ± 0.001 inch)
D2  388-7682 Cylinder As  Bore is 82.55 ± 0.08 mm (3.249 ± 0.003 inch)
D3  388-2076 Rod As  Diameter is 47.575 ± 0.038 mm (1.8730 ± 0.0015 inch)
173-9683 Bolt  Torque to 1800 ± 200 N·m (1328 ± 148 lb ft)
6E-0123 Head As  Bore (D4) over four lands is 47.90 ± 0.03 mm (1.885 ± 0.001 inch)
Before assembly, lubricate with clean grease.
Torque to 600 ± 130 N·m (443 ± 96 lb ft).

Caterpillar Information System:

320 GC, 320 and 323 Excavator Machine Systems Specifications Boom Cylinder Lines
140 Motor Grader Engine Supplement Diesel Exhaust Fluid Tank - Remove and Install
320 GC, 320 and 323 Excavator Machine Systems Specifications Boom Cylinder
140 Motor Graders Window Wipers
320 GC, 320 and 323 Excavator Machine Systems Specifications Boom Lines
120 Motor Graders Wheel Lean Cylinder and Mounting
140 Motor Grader Engine Supplement Nozzle Heater Harness - Remove and Install
140 Motor Grader Engine Supplement Pressure Sensor (ARD Combustion Air) - Remove and Install
301.5,301.6,301.7,301.8,302 Mini Hydraulic Excavator Machine Systems Undercarriage Cylinder (Adjustable Gauge) - Assemble
140 Motor Grader Engine Supplement Temperature Sensor (DPF Inlet, Flame Detect) - Remove and Install
301.5,301.6,301.7,301.8,302 Mini Hydraulic Excavator Machine Systems Undercarriage Cylinder (Adjustable Gauge) - Disassemble
320 GC, 320 and 323 Excavator Machine Systems Specifications Boom Lines
C175 Tier 4 Final Engines for Caterpillar Built Machines Gear Group (Rear) - Remove
140 Motor Grader Machine Systems Fuel Tank - Remove and Install
301.5, 301.6, 301.7 CR, 301.8 and 302 CR Mini Hydraulic Excavator System Schematic
New Configuration Files are Now Available for Certain Cat® Generator Set Engines Equipped with Comap and DEIF Controllers {7610, 7620} New Configuration Files are Now Available for Certain Cat® Generator Set Engines Equipped with Comap and DEIF Controllers {7610, 7620}
New Software Is Now Available on Certain 320 GC, 320, 323, 336 GC and 336 Excavators {7610, 7620} New Software Is Now Available on Certain 320 GC, 320, 323, 336 GC and 336 Excavators {7610, 7620}
Updated Current Transformer (CT) Ratio Values are Now Used On Certain Cat® Generator Set Engines {4476, 4490} Updated Current Transformer (CT) Ratio Values are Now Used On Certain Cat® Generator Set Engines {4476, 4490}
C175 Tier 4 Final Engines for Caterpillar Built Machines Gear Group (Rear) - Install
140 Motor Graders Accumulator Charging Valve
140 Motor Graders Air Conditioner
797F Tier 4 Off-Highway Truck Engine Supplement Engine Trunnion - Remove and Install
320 GC, 320 and 323 Excavator Machine Systems Specifications Pilot Lines
140 Motor Grader Engine Supplement Diesel Exhaust Fluid Pump - Remove and Install
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.