Undercarriage Cylinder (Adjustable Gauge) - Assemble
Show/hide table
所需工具 | |||
---|---|---|---|
工具 | 零件号 | 零件描述 | 数量 |
A | 152-4251 | 油缸修理台 | 1 |
B | 1P-2853 | 活动扳手 | 1 |
C | 280-2060 | 偏置活动扳手 | 1 |
D | 8H-8539 | 1 5/8" 套筒 | 1 |
5P-3588 | 齿座 | 1 |
- 安装密封 (16) 和隔套 (17)。
Show/hide table
图 2 g06295654 - 安装 O 形密封圈 (15)。 安装支承环和 O 形密封圈 (14)。
Show/hide table
图 3 g06295645 Show/hide table图 4 g06295640 - 安装内密封件 (12) 和 O 形密封圈 (13)。 安装外密封件 (11)。
- 安装衬套 (10)。
Show/hide table
图 5 g06296653 - 将油缸螺母 (6) 安装到连杆端 (9) 上。
Show/hide table
图 6 g06295422 - 使用工具 (D) 拧紧活塞 (8)。 拧紧活塞 (8) 至扭矩为
400 ± 20 N·m (295 ± 15 lb ft) 。Show/hide table图 7 g06295398 - 将钢球和调整螺钉 (7) 安装到活塞 (8) 中。 拧紧调整螺钉至扭矩为
17 ± 0.9 N·m (150 ± 8 lb in) 。 向内移动油缸修理台,以将连杆端 (9) 放入缸筒中。Show/hide table图 8 g06328403 - 用液压油润滑缸筒内部和密封件。 将油缸螺母 (6) 安装到缸筒 (5) 中。 从油缸 (5) 的缸筒端下方拆下支架。
Show/hide table
图 9 g06339319 - 使用工具 (B) 拧紧油缸螺母 (6)。 拧紧油缸螺母 (6) 至扭矩为
186 N·m (137 lb ft) 。Show/hide table图 10 g06339313 - 从工具 (A) 上拆下底盘系统油缸 (5)。
Show/hide table
图 11 g06328511 Show/hide table图 12 g06328514 - 将密封件 (1) 安装到底盘系统油缸 (2) 的缸筒端中。 将密封件 (3) 安装到底盘系统油缸 (4) 的连杆端中。
Show/hide table
图 1 | g06295667 |
Caterpillar Information System:
140 Motor Grader Engine Supplement Temperature Sensor (DPF Inlet, Flame Detect) - Remove and Install
301.5,301.6,301.7,301.8,302 Mini Hydraulic Excavator Machine Systems Undercarriage Cylinder (Adjustable Gauge) - Disassemble
320 GC, 320 and 323 Excavator Machine Systems Specifications Boom Lines
Alternator Troubleshooting On Certain 3024C, C1.7, C2.2, C4.4, and C7.1 Engines {1405} Alternator Troubleshooting On Certain 3024C, C1.7, C2.2, C4.4, and C7.1 Engines {1405}
320 GC, 320 and 323 Excavator Machine Systems Specifications Front Lines
140 Motor Grader Engine Supplement Engine Support (Front) - Remove and Install
140 Motor Graders Transmission Filter and Mounting
C15 and C18 Engines for Caterpillar Built Machines Air Compressor Drive Gear - Remove and Install
C15 and C18 Engines for Caterpillar Built Machines Air Compressor - Remove and Install - If Equipped
301.5,301.6,301.7,301.8,302 Mini Hydraulic Excavator Machine Systems Hydraulic Lockout Control - Remove and Install
140 Motor Graders Tandem and Cover
320, 323 Excavator Engine Supplement Fuel Filter and Base - Remove and Install
140 Motor Grader Engine Supplement Pressure Sensor (ARD Combustion Air) - Remove and Install
140 Motor Grader Engine Supplement Nozzle Heater Harness - Remove and Install
120 Motor Graders Wheel Lean Cylinder and Mounting
320 GC, 320 and 323 Excavator Machine Systems Specifications Boom Lines
140 Motor Graders Window Wipers
320 GC, 320 and 323 Excavator Machine Systems Specifications Boom Cylinder
140 Motor Grader Engine Supplement Diesel Exhaust Fluid Tank - Remove and Install
320 GC, 320 and 323 Excavator Machine Systems Specifications Boom Cylinder Lines
120 Motor Graders Articulation Cylinder
C175 Tier 4 Final Engines for Caterpillar Built Machines Gear Group (Rear) - Remove
140 Motor Grader Machine Systems Fuel Tank - Remove and Install
301.5, 301.6, 301.7 CR, 301.8 and 302 CR Mini Hydraulic Excavator System Schematic