Window Wipers
Show/hide table
Illustration 1 | g06339444 |
Show/hide table
Illustration 2 | g06339448 |
View of area A |
Show/hide table
Item | Qty | Part | Specification Description |
---|---|---|---|
1 | 1 | Nut | Use following procedure to install wiper arm: 1. Torque to 2. Wait for minimum 0.5 hour to 4 hours maximum. 3. Again tighten to 4. Ensure that the minimum field torque for the nut is |
2 | - | Nut | Tighten to |
Show/hide table
Illustration 3 | g06339467 |
View of area B |
Show/hide table
Item | Qty | Part | Specification Description |
---|---|---|---|
3 | 3 | 5C-7423 Screw | Torque to |
4 | - | Nut | Tighten to |
Caterpillar Information System:
320 GC, 320 and 323 Excavator Machine Systems Specifications Boom Lines
120 Motor Graders Wheel Lean Cylinder and Mounting
140 Motor Grader Engine Supplement Nozzle Heater Harness - Remove and Install
140 Motor Grader Engine Supplement Pressure Sensor (ARD Combustion Air) - Remove and Install
301.5,301.6,301.7,301.8,302 Mini Hydraulic Excavator Machine Systems Undercarriage Cylinder (Adjustable Gauge) - Assemble
140 Motor Grader Engine Supplement Temperature Sensor (DPF Inlet, Flame Detect) - Remove and Install
301.5,301.6,301.7,301.8,302 Mini Hydraulic Excavator Machine Systems Undercarriage Cylinder (Adjustable Gauge) - Disassemble
320 GC, 320 and 323 Excavator Machine Systems Specifications Boom Lines
Alternator Troubleshooting On Certain 3024C, C1.7, C2.2, C4.4, and C7.1 Engines {1405} Alternator Troubleshooting On Certain 3024C, C1.7, C2.2, C4.4, and C7.1 Engines {1405}
320 GC, 320 and 323 Excavator Machine Systems Specifications Front Lines
140 Motor Grader Engine Supplement Engine Support (Front) - Remove and Install
140 Motor Graders Transmission Filter and Mounting
320 GC, 320 and 323 Excavator Machine Systems Specifications Boom Cylinder
140 Motor Grader Engine Supplement Diesel Exhaust Fluid Tank - Remove and Install
320 GC, 320 and 323 Excavator Machine Systems Specifications Boom Cylinder Lines
120 Motor Graders Articulation Cylinder
C175 Tier 4 Final Engines for Caterpillar Built Machines Gear Group (Rear) - Remove
140 Motor Grader Machine Systems Fuel Tank - Remove and Install
301.5, 301.6, 301.7 CR, 301.8 and 302 CR Mini Hydraulic Excavator System Schematic
New Configuration Files are Now Available for Certain Cat® Generator Set Engines Equipped with Comap and DEIF Controllers {7610, 7620} New Configuration Files are Now Available for Certain Cat® Generator Set Engines Equipped with Comap and DEIF Controllers {7610, 7620}
New Software Is Now Available on Certain 320 GC, 320, 323, 336 GC and 336 Excavators {7610, 7620} New Software Is Now Available on Certain 320 GC, 320, 323, 336 GC and 336 Excavators {7610, 7620}
Updated Current Transformer (CT) Ratio Values are Now Used On Certain Cat® Generator Set Engines {4476, 4490} Updated Current Transformer (CT) Ratio Values are Now Used On Certain Cat® Generator Set Engines {4476, 4490}
C175 Tier 4 Final Engines for Caterpillar Built Machines Gear Group (Rear) - Install
140 Motor Graders Accumulator Charging Valve