Temperature Sensor (DPF Inlet, Flame Detect) - Remove and Install
Show/hide table
| Required Tools | |||
| Tool | Part Number | Part Description | Qty |
| A | - | Loctite 771 Anti-Seize Compound | - |
Start By:
- Remove the engine enclosure (hood).
- Remove panel (1).
Show/hide table
Illustration 2 g03508501 - Disconnect temperature sensor (DPF inlet) (2).
Show/hide table
Illustration 3 g03508503 - Disconnect temperature sensor (flame detect) (3).
Show/hide table
Illustration 4 g03508504 - Remove cables straps (4).
Show/hide table
Illustration 5 g03508506 - Remove cable strap (5).
Show/hide table
Illustration 6 g03508559 - Remove cable strap (6).
Show/hide table
Illustration 7 g03508596 - Remove cable straps (7).
Show/hide table
Illustration 8 g03508597 - Remove cable straps (8) and temperature sensor (DPF inlet, flame detect) (9).
Show/hide table
| |
| Illustration 1 | g06386215 |
- Install temperature sensor (DPF inlet, flame detect) (9) in the reverse order of removal.
- Apply Tooling (A) to the threads on temperature sensor (flame detect) (3) and to the threads of temperature sensor (DPF inlet) (2). Tighten temperature sensor (flame detect) (3) and temperature sensor (DPF inlet) (2) to a torque of
45 ± 5 N·m (33 ± 4 lb ft) .
- Apply Tooling (A) to the threads on temperature sensor (flame detect) (3) and to the threads of temperature sensor (DPF inlet) (2). Tighten temperature sensor (flame detect) (3) and temperature sensor (DPF inlet) (2) to a torque of
Caterpillar Information System:
301.5,301.6,301.7,301.8,302 Mini Hydraulic Excavator Machine Systems Undercarriage Cylinder (Adjustable Gauge) - Disassemble
320 GC, 320 and 323 Excavator Machine Systems Specifications Boom Lines
Alternator Troubleshooting On Certain 3024C, C1.7, C2.2, C4.4, and C7.1 Engines {1405} Alternator Troubleshooting On Certain 3024C, C1.7, C2.2, C4.4, and C7.1 Engines {1405}
320 GC, 320 and 323 Excavator Machine Systems Specifications Front Lines
140 Motor Grader Engine Supplement Engine Support (Front) - Remove and Install
140 Motor Graders Transmission Filter and Mounting
C15 and C18 Engines for Caterpillar Built Machines Air Compressor Drive Gear - Remove and Install
C15 and C18 Engines for Caterpillar Built Machines Air Compressor - Remove and Install - If Equipped
301.5,301.6,301.7,301.8,302 Mini Hydraulic Excavator Machine Systems Hydraulic Lockout Control - Remove and Install
140 Motor Graders Tandem and Cover
320, 323 Excavator Engine Supplement Fuel Filter and Base - Remove and Install
140 Motor Grader Engine Supplement Vibration Damper and Pulley - Remove and Install
301.5,301.6,301.7,301.8,302 Mini Hydraulic Excavator Machine Systems Undercarriage Cylinder (Adjustable Gauge) - Assemble
140 Motor Grader Engine Supplement Pressure Sensor (ARD Combustion Air) - Remove and Install
140 Motor Grader Engine Supplement Nozzle Heater Harness - Remove and Install
120 Motor Graders Wheel Lean Cylinder and Mounting
320 GC, 320 and 323 Excavator Machine Systems Specifications Boom Lines
140 Motor Graders Window Wipers
320 GC, 320 and 323 Excavator Machine Systems Specifications Boom Cylinder
140 Motor Grader Engine Supplement Diesel Exhaust Fluid Tank - Remove and Install
320 GC, 320 and 323 Excavator Machine Systems Specifications Boom Cylinder Lines
120 Motor Graders Articulation Cylinder
C175 Tier 4 Final Engines for Caterpillar Built Machines Gear Group (Rear) - Remove
140 Motor Grader Machine Systems Fuel Tank - Remove and Install