Engine Support (Front) - Remove and Install
Start By:
- Remove the fuel tanks.
- Remove the hood.
- Remove the vibration damper and pulley.
- Attach a suitable lifting device to engine (1). The weight of the engine (1) is approximately
890 kg (1962 lb) .Show/hide tableIllustration 2 g06411495 - Remove two bolts (2), the washers, and two mounts (3).
- Remove six bolts (4), the washers, and engine support (5).
Show/hide table
Illustration 1 | g06411487 |
- Install engine support (5) in the reverse order of removal.
- Tighten bolts (4) to a torque of
120 ± 20 N.m (89 ± 15 lb ft) .
- Tighten bolts (4) to a torque of
Caterpillar Information System:
140 Motor Graders Transmission Filter and Mounting
C15 and C18 Engines for Caterpillar Built Machines Air Compressor Drive Gear - Remove and Install
C15 and C18 Engines for Caterpillar Built Machines Air Compressor - Remove and Install - If Equipped
301.5,301.6,301.7,301.8,302 Mini Hydraulic Excavator Machine Systems Hydraulic Lockout Control - Remove and Install
140 Motor Graders Tandem and Cover
320, 323 Excavator Engine Supplement Fuel Filter and Base - Remove and Install
140 Motor Grader Engine Supplement Vibration Damper and Pulley - Remove and Install
797F Tier 4 Off-Highway Truck Engine Supplement Guard (Engine Oil Pan) - Remove and Install
323 Excavator Engine Supplement Fuel Filter and Base - Remove and Install
140 Motor Grader Machine Systems Hydraulic Tank and Filter - Remove and Install
307.5, 308, 308.5, 309, and 310 Mini Hydraulic Excavators Track Adjustment - Adjust
301.5, 301.6, 301.7 CR, 301.8, and 302 CR Mini Hydraulic Excavator Machine System Electronic Control (Travel System)
320 GC, 320 and 323 Excavator Machine Systems Specifications Front Lines
Alternator Troubleshooting On Certain 3024C, C1.7, C2.2, C4.4, and C7.1 Engines {1405} Alternator Troubleshooting On Certain 3024C, C1.7, C2.2, C4.4, and C7.1 Engines {1405}
320 GC, 320 and 323 Excavator Machine Systems Specifications Boom Lines
301.5,301.6,301.7,301.8,302 Mini Hydraulic Excavator Machine Systems Undercarriage Cylinder (Adjustable Gauge) - Disassemble
140 Motor Grader Engine Supplement Temperature Sensor (DPF Inlet, Flame Detect) - Remove and Install
301.5,301.6,301.7,301.8,302 Mini Hydraulic Excavator Machine Systems Undercarriage Cylinder (Adjustable Gauge) - Assemble
140 Motor Grader Engine Supplement Pressure Sensor (ARD Combustion Air) - Remove and Install
140 Motor Grader Engine Supplement Nozzle Heater Harness - Remove and Install
120 Motor Graders Wheel Lean Cylinder and Mounting
320 GC, 320 and 323 Excavator Machine Systems Specifications Boom Lines
140 Motor Graders Window Wipers
320 GC, 320 and 323 Excavator Machine Systems Specifications Boom Cylinder