Guard (Engine Oil Pan) - Remove and Install
- If equipped with a sound suppression arrangement, refer to Special Instruction, "Install the 397-3556 Sound Suppression Panel Gp for the Sound Suppression Arrangement" for specific panel locations and the correct removal or installation procedure.
Show/hide table
Illustration 1 g01750115 - Use two people to remove guard (2). The weight of guard (2) is approximately
22 kg (49 lb) . - Remove bolts (1) and guard (2). Repeat the step for the remaining guards.
- Install guard (2) in the reverse order of removal.
Caterpillar Information System:
323 Excavator Engine Supplement Fuel Filter and Base - Remove and Install
140 Motor Grader Machine Systems Hydraulic Tank and Filter - Remove and Install
307.5, 308, 308.5, 309, and 310 Mini Hydraulic Excavators Track Adjustment - Adjust
301.5, 301.6, 301.7 CR, 301.8, and 302 CR Mini Hydraulic Excavator Machine System Electronic Control (Travel System)
140 Motor Grader Engine Supplement Catalyst (SCR) - Remove and Install
301.5, 301.6, 301.7 CR, 301.8, and 302 CR Mini Hydraulic Excavator Machine System Electronic Control (Swing System)
301.5,301.6,301.7,301.8,302 Mini Hydraulic Excavator Machine Systems Upper Frame and Undercarriage Frame - Connect
301.5,301.6,301.7,301.8,302 Mini Hydraulic Excavator Machine Systems Upper Frame and Undercarriage Frame - Separate
140 Motor Grader Engine Supplement Solenoid Valve (ARD Fuel) - Remove and Install - Main
301.5, 301.6, 301.7 CR, 301.8, and 302 CR Mini Hydraulic Excavator Machine System Electronic Control (Blade System)
301.5, 301.6, 301.7 CR, 301.8, and 302 CR Mini Hydraulic Excavator Machine System Electronic Control (Bucket System)
301.5, 301.6, 301.7 CR, 301.8, and 302 CR Mini Hydraulic Excavator Machine System Electronic Control (Stick System)
140 Motor Grader Engine Supplement Vibration Damper and Pulley - Remove and Install
320, 323 Excavator Engine Supplement Fuel Filter and Base - Remove and Install
140 Motor Graders Tandem and Cover
301.5,301.6,301.7,301.8,302 Mini Hydraulic Excavator Machine Systems Hydraulic Lockout Control - Remove and Install
C15 and C18 Engines for Caterpillar Built Machines Air Compressor - Remove and Install - If Equipped
C15 and C18 Engines for Caterpillar Built Machines Air Compressor Drive Gear - Remove and Install
140 Motor Graders Transmission Filter and Mounting
140 Motor Grader Engine Supplement Engine Support (Front) - Remove and Install
320 GC, 320 and 323 Excavator Machine Systems Specifications Front Lines
Alternator Troubleshooting On Certain 3024C, C1.7, C2.2, C4.4, and C7.1 Engines {1405} Alternator Troubleshooting On Certain 3024C, C1.7, C2.2, C4.4, and C7.1 Engines {1405}
320 GC, 320 and 323 Excavator Machine Systems Specifications Boom Lines
301.5,301.6,301.7,301.8,302 Mini Hydraulic Excavator Machine Systems Undercarriage Cylinder (Adjustable Gauge) - Disassemble