Removal Procedure
Reference: Special Instruction, "Visual Service Procedures - Colors and Symbols" , M0066576.
Show/hide table
Table 1
| Required Tools |
| Tool |
Part Number |
Part Description |
Qty |
| A |
- |
Strap Wrench |
1 |
Start By:
- Turn the fuel supply to the OFF position.
- Turn the battery disconnect switch to the OFF position.
Show/hide table
|
| NOTICE |
|---|
|
Ensure that all adjustments and repairs that are carried out to the fuel system are performed by authorized personnel that have the correct training.
Before beginning ANY work on the fuel system, refer to Operation and Maintenance Manual, "General Hazard Information and High-Pressure Fuel Lines" for safety information.
Refer to System Operation, Testing and Adjusting, "Cleanliness of Fuel System Components" for detailed information on the standards of cleanliness that must be observed during ALL work on the fuel system. |
|
Show/hide table
|
| NOTICE |
|---|
|
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.
Dispose of all fluids according to local regulations and mandates. |
|
Show/hide table
|
|
|
| Illustration 1 | g06338986 |
Show/hide table
|
|
|
| Illustration 2 | g06338987 |
Make temporary identification marks on all the hose assemblies to show the correct position of the hose assemblies.
Place a suitable container below the fuel filter base to catch any fuel that might be spilled.
|
Show/hide table
|
|
|
| Illustration 3 | g06338988 |
Show/hide table
|
|
|
| Illustration 4 | g06338989 |
Show/hide table
|
|
|
| Illustration 5 | g06338990 |
Note position of different length bolts.
|
Installation Procedure
- Install the fuel filter and base in the reverse order of removal.
Show/hide table
|
|
|
| Illustration 6 | g06339009 |
