Fuel Injection Nozzles - Remove and Install
Show/hide table
| Required Tools | |||
| Tool | Part Number | Part Description | Qty |
| A | 4C-5650 | Threaded Adapter | 1 |
| 1U-7600 | Slide Hammer | 1 | |
Start By:
- Remove the fuel injection lines.
- Remove two nuts (1) and adapter (2).
Show/hide table
Illustration 2 g06335200 - Remove fuel injection nozzle (3). If necessary, use Tooling (A) to remove fuel injection nozzle (3).
- Repeat Step 1 through Step 2 for the remaining fuel injection nozzles.
Show/hide table
| |
| Illustration 1 | g06334993 |
- Install fuel injection nozzle (3) in the reverse order of removal.
- Tighten two nuts (1) to a torque of
16 ± 3 N·m (142 ± 27 lb in) .
- Tighten two nuts (1) to a torque of
Caterpillar Information System:
G3512 EPA Emergency and Non-Emergency Standby Generator Sets Nitrogen Oxide Sensor - Calibrate
G3512 EPA Emergency and Non-Emergency Standby Generator Sets Fluid Recommendations
G3512 EPA Emergency and Non-Emergency Standby Generator Sets Emergency Stopping
G3512 EPA Emergency and Non-Emergency Standby Generator Sets Before Starting Engine
320 D3 Hydraulic Excavators Engine Disassembly and Assembly Fuel Injection Lines - Install
Cat® Reman Announces the Release of H1315B Injector with Pre-Screens for C7 and C9 Engines {1251, 1290} Cat® Reman Announces the Release of H1315B Injector with Pre-Screens for C7 and C9 Engines {1251, 1290}
301.5,301.6,301.7,301.8,302 Mini Hydraulic Excavator Engine Supplement Battery - Remove and Install
140 Motor Graders Articulated Hitch
336, 336 GC and 340 Excavator Systems Swivel
C175 Tier 4 Final Engines for Caterpillar Built Machines Flywheel - Remove and Install
308 Mini Hydraulic Excavators Lifting Capacities - 308 SR Excavator
308 Mini Hydraulic Excavators Boom/Stick/Bucket Combinations
308 Mini Hydraulic Excavators Front Control System - If Equipped
120 and 120 AWD Motor Grader Circle Clearances - Check/Adjust
Installation Procedure of the Front and Left Side Camera on Certain 320 and 323 Next Generation Excavators {7348} Installation Procedure of the Front and Left Side Camera on Certain 320 and 323 Next Generation Excavators {7348}
C175 Tier 4 Final Engines for Caterpillar Built Machines Flywheel Housing - Remove
Rework Procedure for Generator Sets with the 262-8196 Generator Arrangement {4450} Rework Procedure for Generator Sets with the 262-8196 Generator Arrangement {4450}
G3500H 60Hz Generator Sets Flexible Coupling (Rubber) - Inspect
G3500H 60Hz Generator Sets Flexible Coupling (Silicone Compression) - Inspect
An Improved Engine Oil Lines on Certain G3500H HD Engines {1307, 1469} An Improved Engine Oil Lines on Certain G3500H HD Engines {1307, 1469}
New Software Is Now Used for Certain C175-16 Engines {7620} New Software Is Now Used for Certain C175-16 Engines {7620}
308 Mini Hydraulic Excavators Maintenance Interval Schedule
Fuel Filter May Leak on Certain 3406, 3412, C9, C9.3, C13, C15, and C18Engines {1260, 1261, 1262} Fuel Filter May Leak on Certain 3406, 3412, C9, C9.3, C13, C15, and C18Engines {1260, 1261, 1262}
New Cylinder Pack Components are Now Used On Certain 3512 and 3516 Engines {1214, 1215} New Cylinder Pack Components are Now Used On Certain 3512 and 3516 Engines {1214, 1215}