Improved Switch Assembly for Quick Coupler Is Now Used on Certain 320, 320 GC, and 323 Excavators {1435}
- Excavator
- 320 (S/N: BR61-351; ZBN1-235; HEX1-1700)
- 320 GC (S/N: BR41-247; DKJ1-1267; KTN1-356)
- 323 (S/N: BR91-174; YBL1-204; RAZ1-718)
- 320 GC (S/N: BR41-247; DKJ1-1267; KTN1-356)
Description Of Change: A new switch for the quick coupler is now used on the machines listed above. The new switch is more durable against unexpected external upward forces.
Adaptable To: The following part is adaptable to the machines within the listed serial numbers, and is effective with all machines after the listed serial numbers. Refer to Table 1 for the new part number.
Show/hide table
Required Parts | |||
---|---|---|---|
Item | Qty | New Part Number | Part Name |
1 | 1 | Rocker Switch |
Show/hide table
Illustration 1 | g06322026 |
The improved switch can be specified by checking the part number "498-9091HExx" on the surface of the switch assembly. The improved switch will display "03" or greater in place of the "xx" in the part number.
Operate the quick coupler switch as explained below. No external upward force will be loaded on the red tab during correct operating procedure.
Show/hide table
Illustration 2 | g06322024 |
(1) (2) Red tab (A) Forward (B) Down |
- Slide the red tab (2) forward (A).
- Push down (B) the back half of the switch, holding the slid red tab.
Caterpillar Information System:
320D3 and 323D3 Excavators Machine System Specifications Main Hydraulic Pump
320D3 and 323D3 Excavators Machine System Specifications Main Hydraulic Pump and Mounting
C7.1 (Mechanical) Engines for Caterpillar Built Machines Crankshaft Rear Seal - Remove
New Oil Gauge is Now Used on Certain C9.3 Machine Engines {1326} New Oil Gauge is Now Used on Certain C9.3 Machine Engines {1326}
3516C IMO III Petroleum Engines Air Starting Motor - Install
C175 Tier 4 Final Engines for Caterpillar Built Machines Engine Oil Cooler - Assemble
Rework Procedure for Solar Charger Wires May be Reversed on Certain Generator Sets {1408, 7556} Rework Procedure for Solar Charger Wires May be Reversed on Certain Generator Sets {1408, 7556}
797F Tier 4 Off-Highway Truck Engine Supplement Fuel Filter (Primary) and Fuel Filter Base - Remove and Install
3516C IMO III Petroleum Engines Air Starting Motor - Remove
320D3 Excavators Engine Oil Sample - Obtain
320D3 Excavators Cooling System Coolant (ELC) - Change
C175 Tier 4 Final Engines for Caterpillar Built Machines Engine Oil Cooler - Disassemble
797F Tier 4 Off-Highway Truck Engine Supplement Fuel Pump (Electric) - Remove and Install - Clean Fuel Module
3516C IMO III Petroleum Engines Electronic Control Module (Engine) - Remove and Install - Primary ECM
3516C IMO III Petroleum Engines Electronic Control Module (Engine) - Remove and Install - Secondary ECM
320D3 and 323D3 Excavators Machine System Specifications Swing Drive
320D3 and 323D3 Excavators Machine System Specifications Pump Head (Main)
320D3 and 323D3 Excavators Machine System Specifications Auxiliary Hydraulic Lines
3516C IMO III Petroleum Engines Fuel Filter Housing - Remove
3516C IMO III Petroleum Engines Fuel Filter Housing - Install
SR5 Electric Power Generation Rotating Rectifier - Test - Discrete Diode Test
3516C IMO III Petroleum Engines Vibration Damper - Remove and Install
SR5 Electric Power Generation Rotating Rectifier - Inspect/Test
SR5 Electric Power Generation Space Heater - Test