Fuel Pump (Electric) - Remove and Install - Clean Fuel Module
Show/hide table
Personal injury or death can result from a fire. Fuel leaked or spilled onto hot surfaces or electrical components can cause a fire. Clean up all leaked or spilled fuel. Do not smoke while working on the fuel system. Turn the disconnect switch OFF or disconnect the battery when changing fuel filters. |
- Disconnect hose assembly (1) and hose assembly (2).
Show/hide table
Illustration 2 g06325087 - Remove ladder clip (3) , cable strap mount (7), and cable strap mount (5). Disconnect harness connector (6), harness connector (4), and place harness assembly to the side.
Show/hide table
Illustration 3 g06325127 Components have been altered for clarity - Remove bolts (8) and ball valve (9).
Show/hide table
Illustration 4 g06325136 - Remove bolts (10) and clean fuel module (11).
Show/hide table
Illustration 5 g06325362 - Remove pressure sensor group (12) and elbow adapter (13).
Show/hide table
Illustration 1 | g06325034 |
- Install clean fuel module (11) in the reverse order of removal.
- Tighten pressure sensor (12) to a torque of
16 ± 3 N·m (142 ± 27 lb in) .
- Tighten pressure sensor (12) to a torque of
Caterpillar Information System:
Improved Switch Assembly for Quick Coupler Is Now Used on Certain 320, 320 GC, and 323 Excavators {1435} Improved Switch Assembly for Quick Coupler Is Now Used on Certain 320, 320 GC, and 323 Excavators {1435}
320D3 and 323D3 Excavators Machine System Specifications Main Hydraulic Pump
320D3 and 323D3 Excavators Machine System Specifications Main Hydraulic Pump and Mounting
C7.1 (Mechanical) Engines for Caterpillar Built Machines Crankshaft Rear Seal - Remove
New Oil Gauge is Now Used on Certain C9.3 Machine Engines {1326} New Oil Gauge is Now Used on Certain C9.3 Machine Engines {1326}
3516C IMO III Petroleum Engines Air Starting Motor - Install
C175 Tier 4 Final Engines for Caterpillar Built Machines Engine Oil Cooler - Assemble
Rework Procedure for Solar Charger Wires May be Reversed on Certain Generator Sets {1408, 7556} Rework Procedure for Solar Charger Wires May be Reversed on Certain Generator Sets {1408, 7556}
797F Tier 4 Off-Highway Truck Engine Supplement Fuel Filter (Primary) and Fuel Filter Base - Remove and Install
3516C IMO III Petroleum Engines Air Starting Motor - Remove
320D3 Excavators Engine Oil Sample - Obtain
320D3 Excavators Cooling System Coolant (ELC) - Change
3516C IMO III Petroleum Engines Electronic Control Module (Engine) - Remove and Install - Primary ECM
3516C IMO III Petroleum Engines Electronic Control Module (Engine) - Remove and Install - Secondary ECM
320D3 and 323D3 Excavators Machine System Specifications Swing Drive
320D3 and 323D3 Excavators Machine System Specifications Pump Head (Main)
320D3 and 323D3 Excavators Machine System Specifications Auxiliary Hydraulic Lines
3516C IMO III Petroleum Engines Fuel Filter Housing - Remove
3516C IMO III Petroleum Engines Fuel Filter Housing - Install
SR5 Electric Power Generation Rotating Rectifier - Test - Discrete Diode Test
3516C IMO III Petroleum Engines Vibration Damper - Remove and Install
SR5 Electric Power Generation Rotating Rectifier - Inspect/Test
SR5 Electric Power Generation Space Heater - Test
3500 Engines Crankcase Breather