Vibration Damper - Remove and Install
Show/hide table
Required Tools | |||
Tool | Part Number | Part Description | Qty |
A | - | Guide Stud 1-14 10 inch | 2 |
B | - | Loctite LB Thread Lubricant | 1 |
Start By:
- Remove engine oil filter housing.
- Remove bolts (1) and guard assembly (2).
Show/hide table
Illustration 2 g06321680 - Install tooling (A).
Show/hide table
Illustration 3 g06321684 - Remove bolts (3).
Show/hide table
Illustration 4 g06321690 - Slide vibration damper (4) on Tooling (A) and attach a suitable lifting device. The weight of the vibration damper is approximately
200 kg (441 lb) . - Remove vibration damper (4).
Show/hide table
Illustration 1 | g06321670 |
- Install Tooling (A) into end of crankshaft.
- Attach a suitable lifting device onto vibration damper (4) and slide onto Tooling (A). The weight of the vibration damper is approximately
200 kg (441 lb) .Show/hide tableIllustration 6 g06321684 - Apply Tooling (B) to bolts (3).
- Install bolts (3) and torque bolts to
1150 ± 60 N·m (848 ± 44 lb ft) .Show/hide tableIllustration 7 g06321680 - Remove Tooling (A).
Show/hide table
Illustration 8 g06321670 - Install guard assembly (2) and bolts (1).
Show/hide table
Illustration 5 | g06321690 |
Caterpillar Information System:
SR5 Electric Power Generation Rotating Rectifier - Test - Discrete Diode Test
3516C IMO III Petroleum Engines Fuel Filter Housing - Install
3516C IMO III Petroleum Engines Fuel Filter Housing - Remove
320D3 and 323D3 Excavators Machine System Specifications Auxiliary Hydraulic Lines
320D3 and 323D3 Excavators Machine System Specifications Pump Head (Main)
320D3 and 323D3 Excavators Machine System Specifications Swing Drive
3516C IMO III Petroleum Engines Electronic Control Module (Engine) - Remove and Install - Secondary ECM
3516C IMO III Petroleum Engines Electronic Control Module (Engine) - Remove and Install - Primary ECM
797F Tier 4 Off-Highway Truck Engine Supplement Fuel Pump (Electric) - Remove and Install - Clean Fuel Module
Improved Switch Assembly for Quick Coupler Is Now Used on Certain 320, 320 GC, and 323 Excavators {1435} Improved Switch Assembly for Quick Coupler Is Now Used on Certain 320, 320 GC, and 323 Excavators {1435}
320D3 and 323D3 Excavators Machine System Specifications Main Hydraulic Pump
320D3 and 323D3 Excavators Machine System Specifications Main Hydraulic Pump and Mounting
SR5 Electric Power Generation Rotating Rectifier - Inspect/Test
SR5 Electric Power Generation Space Heater - Test
3500 Engines Crankcase Breather
3500 Engines Engine Oil Pan
3500 Engines Engine Oil Pan
3516C IMO III Petroleum Engines Auxiliary Fuel Filter Housing - Remove
3516C IMO III Petroleum Engines Auxiliary Fuel Filter Housing - Install
3500 Engines Engine Oil Pan
3516C IMO III Petroleum Engines Turbocharger - Remove
3500 Engines Atmospheric Pressure Sensor
3500 Engines Fuel Filter (Primary)
G3512 Gas Engine Water Lines