Electronic Control Module (Engine) - Remove and Install - Secondary ECM
Note: If the ECM is being replaced, download the personality module before you remove the ECM. Refer to Troubleshooting, ECM - Replace.
- Remove ten bolts (1) and covers (2).
Show/hide table
Illustration 2 g06321515 Left-Side of Engine - Remove harness assemblies (3) and (4).
Show/hide table
Illustration 3 g06321518 Left-Side of Engine - Remove eight bolts (5) and covers (6).
Show/hide table
Illustration 4 g06321520 Left-Side of Engine - Remove four bolts (7) and ECM (8).
Show/hide table
| |
| Illustration 1 | g06321513 |
|
Left-Side of Engine | |
- Position ECM (8) and install four bolts (7).
Show/hide table
Illustration 6 g06321518 Left-Side of Engine - Position covers (6) and install eight bolts (5).
Show/hide table
Illustration 7 g06321515 Left-Side of Engine - Connect harness assemblies (3) and (4).
Show/hide table
Illustration 8 g06321513 Left-Side of Engine - Position covers (2) and install ten bolts (1).
Show/hide table
| |
| Illustration 5 | g06321520 |
|
Left-Side of Engine | |
Caterpillar Information System:
3516C IMO III Petroleum Engines Electronic Control Module (Engine) - Remove and Install - Primary ECM
797F Tier 4 Off-Highway Truck Engine Supplement Fuel Pump (Electric) - Remove and Install - Clean Fuel Module
Improved Switch Assembly for Quick Coupler Is Now Used on Certain 320, 320 GC, and 323 Excavators {1435} Improved Switch Assembly for Quick Coupler Is Now Used on Certain 320, 320 GC, and 323 Excavators {1435}
320D3 and 323D3 Excavators Machine System Specifications Main Hydraulic Pump
320D3 and 323D3 Excavators Machine System Specifications Main Hydraulic Pump and Mounting
C7.1 (Mechanical) Engines for Caterpillar Built Machines Crankshaft Rear Seal - Remove
New Oil Gauge is Now Used on Certain C9.3 Machine Engines {1326} New Oil Gauge is Now Used on Certain C9.3 Machine Engines {1326}
3516C IMO III Petroleum Engines Air Starting Motor - Install
C175 Tier 4 Final Engines for Caterpillar Built Machines Engine Oil Cooler - Assemble
Rework Procedure for Solar Charger Wires May be Reversed on Certain Generator Sets {1408, 7556} Rework Procedure for Solar Charger Wires May be Reversed on Certain Generator Sets {1408, 7556}
797F Tier 4 Off-Highway Truck Engine Supplement Fuel Filter (Primary) and Fuel Filter Base - Remove and Install
3516C IMO III Petroleum Engines Air Starting Motor - Remove
320D3 and 323D3 Excavators Machine System Specifications Swing Drive
320D3 and 323D3 Excavators Machine System Specifications Pump Head (Main)
320D3 and 323D3 Excavators Machine System Specifications Auxiliary Hydraulic Lines
3516C IMO III Petroleum Engines Fuel Filter Housing - Remove
3516C IMO III Petroleum Engines Fuel Filter Housing - Install
SR5 Electric Power Generation Rotating Rectifier - Test - Discrete Diode Test
3516C IMO III Petroleum Engines Vibration Damper - Remove and Install
SR5 Electric Power Generation Rotating Rectifier - Inspect/Test
SR5 Electric Power Generation Space Heater - Test
3500 Engines Crankcase Breather
3500 Engines Engine Oil Pan
3500 Engines Engine Oil Pan