Fuel Filter Housing - Remove
Start By:
- Remove auxiliary fuel filter housing.
Show/hide table
| NOTICE |
|---|
|
Keep all parts clean from contaminants. Contaminants may cause rapid wear and shortened component life. |
Show/hide table
| NOTICE |
|---|
|
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting, and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids. Refer to Special Publication, NENG2500, "Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Cat® products. Dispose of all fluids according to local regulations and mandates. |
- Shut OFF the fuel supply to the engine.
Show/hide table
Illustration 1 g06321597 - Disconnect tube assembly (1) and remove tube assembly (2).
Show/hide table
Illustration 2 g06321610 - Disconnect tube assembly (3) and remove tube assembly (4).
Show/hide table
Illustration 3 g06321614 - Remove bolts (5) and tube assembly (6).
Show/hide table
Illustration 4 g06321632 - Attach a suitable lifting device to fuel filter housing (8). The weight of fuel filter housing is approximately
30 kg (66 lb) . - Use a suitable lifting device and remove bolts (7) and fuel filter housing (8).
Caterpillar Information System:
320D3 and 323D3 Excavators Machine System Specifications Auxiliary Hydraulic Lines
320D3 and 323D3 Excavators Machine System Specifications Pump Head (Main)
320D3 and 323D3 Excavators Machine System Specifications Swing Drive
3516C IMO III Petroleum Engines Electronic Control Module (Engine) - Remove and Install - Secondary ECM
3516C IMO III Petroleum Engines Electronic Control Module (Engine) - Remove and Install - Primary ECM
797F Tier 4 Off-Highway Truck Engine Supplement Fuel Pump (Electric) - Remove and Install - Clean Fuel Module
Improved Switch Assembly for Quick Coupler Is Now Used on Certain 320, 320 GC, and 323 Excavators {1435} Improved Switch Assembly for Quick Coupler Is Now Used on Certain 320, 320 GC, and 323 Excavators {1435}
320D3 and 323D3 Excavators Machine System Specifications Main Hydraulic Pump
320D3 and 323D3 Excavators Machine System Specifications Main Hydraulic Pump and Mounting
C7.1 (Mechanical) Engines for Caterpillar Built Machines Crankshaft Rear Seal - Remove
New Oil Gauge is Now Used on Certain C9.3 Machine Engines {1326} New Oil Gauge is Now Used on Certain C9.3 Machine Engines {1326}
3516C IMO III Petroleum Engines Air Starting Motor - Install
3516C IMO III Petroleum Engines Fuel Filter Housing - Install
SR5 Electric Power Generation Rotating Rectifier - Test - Discrete Diode Test
3516C IMO III Petroleum Engines Vibration Damper - Remove and Install
SR5 Electric Power Generation Rotating Rectifier - Inspect/Test
SR5 Electric Power Generation Space Heater - Test
3500 Engines Crankcase Breather
3500 Engines Engine Oil Pan
3500 Engines Engine Oil Pan
3516C IMO III Petroleum Engines Auxiliary Fuel Filter Housing - Remove
3516C IMO III Petroleum Engines Auxiliary Fuel Filter Housing - Install
3500 Engines Engine Oil Pan
3516C IMO III Petroleum Engines Turbocharger - Remove