Auxiliary Fuel Filter Housing - Remove
Show/hide table
NOTICE |
---|
Keep all parts clean from contaminants. Contaminants may cause rapid wear and shortened component life. |
Show/hide table
NOTICE |
---|
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting, and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids. Refer to Special Publication, NENG2500, "Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Cat® products. Dispose of all fluids according to local regulations and mandates. |
- Shut OFF the fuel supply to the engine.
- Drain the auxiliary fuel filter housing into a suitable container for storage or for disposal.
Show/hide table
Illustration 1 g06321556 - Remove hose (1).
- Remove bolts (2) and (3).
- Disconnect harness assembly (4).
Show/hide table
Illustration 2 g06321571 - Attach a suitable lifting device to fuel auxiliary housing (6). The weight of fuel auxiliary housing assembly is approximately
11 kg (24 lb) . - Remove three bolts (5)
- Remove tube assembly (8).
- Remove tube assembly (7).
- Use a suitable lifting device and remove fuel auxiliary housing (6).
Caterpillar Information System:
3500 Engines Engine Oil Pan
3500 Engines Engine Oil Pan
3500 Engines Crankcase Breather
SR5 Electric Power Generation Space Heater - Test
SR5 Electric Power Generation Rotating Rectifier - Inspect/Test
3516C IMO III Petroleum Engines Vibration Damper - Remove and Install
SR5 Electric Power Generation Rotating Rectifier - Test - Discrete Diode Test
3516C IMO III Petroleum Engines Fuel Filter Housing - Install
3516C IMO III Petroleum Engines Fuel Filter Housing - Remove
320D3 and 323D3 Excavators Machine System Specifications Auxiliary Hydraulic Lines
320D3 and 323D3 Excavators Machine System Specifications Pump Head (Main)
320D3 and 323D3 Excavators Machine System Specifications Swing Drive
3516C IMO III Petroleum Engines Auxiliary Fuel Filter Housing - Install
3500 Engines Engine Oil Pan
3516C IMO III Petroleum Engines Turbocharger - Remove
3500 Engines Atmospheric Pressure Sensor
3500 Engines Fuel Filter (Primary)
G3512 Gas Engine Water Lines
3500 Engines Water Lines
3500 Engines Turbocharger Exhaust Temperature Sensor
3516C IMO III Petroleum Engines Air Shutoff - Remove and Install
C175-16 Petroleum Engine Sensor Signal (Analog, Passive) - Test
797F Tier 4 Off-Highway Truck Engine Supplement Fuel Filter (Secondary) and Fuel Filter Base - Remove and Install
Air Cleaner Group May Crack on Certain 374F and 390F Excavators {1051, 1054} Air Cleaner Group May Crack on Certain 374F and 390F Excavators {1051, 1054}