Turbocharger Exhaust Temperature Sensor
Show/hide table
| |
| Illustration 1 | g06321892 |
Show/hide table
| Item | Qty | Part | Specification Description |
|---|---|---|---|
| 1 | - | - | Use the following procedure to tighten the adapter:
1. Do not assemble probe to the adapter until the adapter is torqued. 2. Final installation tighten to the adapter is 3. Then, tighten the probe to |
| Voltage supply is 7.5 to 8.5 VDC. |
Caterpillar Information System:
3500 Engines Water Lines
G3512 Gas Engine Water Lines
3500 Engines Fuel Filter (Primary)
3500 Engines Atmospheric Pressure Sensor
3516C IMO III Petroleum Engines Turbocharger - Remove
3500 Engines Engine Oil Pan
3516C IMO III Petroleum Engines Auxiliary Fuel Filter Housing - Install
3516C IMO III Petroleum Engines Auxiliary Fuel Filter Housing - Remove
3500 Engines Engine Oil Pan
3500 Engines Engine Oil Pan
3500 Engines Crankcase Breather
SR5 Electric Power Generation Space Heater - Test
3516C IMO III Petroleum Engines Air Shutoff - Remove and Install
C175-16 Petroleum Engine Sensor Signal (Analog, Passive) - Test
797F Tier 4 Off-Highway Truck Engine Supplement Fuel Filter (Secondary) and Fuel Filter Base - Remove and Install
Air Cleaner Group May Crack on Certain 374F and 390F Excavators {1051, 1054} Air Cleaner Group May Crack on Certain 374F and 390F Excavators {1051, 1054}
320D3 and 323D3 Excavators Machine Electronic Control System Diagnostic Trouble Codes
3500 Engines Fuel Filter
320D3 and 323D3 Monitoring System General Information
3500 Engines Accessory Drive (Upper Left Hand)
320D3 and 323D3 Monitoring System Prestart Monitoring Function
320D3 Excavator Hydraulic System Main Hydraulic Pump Air - Purge
3500 Engines Exhaust Elbow
320D3 and 323D3 Monitoring System Password Entry