The "Password Entry" menu option is entered by selecting "Service" from the Main Menu. Once "Password Entry" is selected, press the "OK" key .
The following screen will be displayed.
Illustration 1 | g06322108 |
(1) Back Key
(2) Up Key (3) Down Key (4) ''OK'' Key (5) Enter Key |
The direction keys are used to input the password. Press the up Key (2) or the down Key (3) to highlight the desired number. Press the OK Key (4) to set the desired number.
When four characters have been set, press the Enter Key (5). The monitoring system will check the password.
If the password is correct, access to the menu is allowed.
Note: The general factory default customer password is "0001". The factory default password for the service menu is "9992". After the password has been entered, press the "Enter" (5) key.
If the password is incorrect, "Incorrect Password" will be displayed. Press the "OK" Key (4) to retry the password in the previous screen. Refer to Illustration 2.
Illustration 2 | g06322115 |
After the password has been successfully entered, the "Service" menu options will be active until the machine is powered down (key OFF). On the next start (key ON), the password must be reentered to enable the "Service" menu options again.
Note: The customer password can access only to ECM summary and diagnostics inside the service menu. Service password can access the complete service menu and service menu password cannot be changed to "0001".