320D3 and 323D3 Excavators Machine Electronic Control System Caterpillar


Diagnostic Trouble Codes

Usage:

320D3 ESX
The following is a list of Diagnostic Trouble Codes (DTCs) for the machines associated with this manual. When a diagnostic code becomes active, refer to the Troubleshooting section of this manual for a specific troubleshooting procedure.

Component Identifier (CID) and Failure Mode Identifier Information

Table 1
Machine ECM (MID 299) 
DTC  Description  Procedure 
17-3  Fuel Shutoff Valve : Voltage Above Normal  Solenoid Valve - Test 
17-5  Fuel Shutoff Valve : Current Below Normal  Solenoid Valve - Test 
17-6  Fuel Shutoff Valve : Current Above Normal  Solenoid Valve - Test 
41-3  8 VDC Supply : Voltage Above Normal  Sensor Supply - Test 
41-4  8 VDC Supply : Voltage Below Normal  Sensor Supply - Test 
96-4  Fuel Level Sensor : Voltage Below Normal  Sensor Signal (Analog, Passive) - Test 
100-3  Engine Oil Pressure Sensor : Voltage Above Normal  Sensor Signal (Analog, Active) - Test 
100-4  Engine Oil Pressure Sensor : Voltage Below Normal  Sensor Signal (Analog, Active) - Test 
110-4  Coolant Temperature Sensor : Voltage Above Normal  Sensor Signal (Analog, Passive) - Test 
246-9  Proprietary CAN Data Link : Abnormal Update Rate  CAN Data Link - Test 
246-19  Proprietary CAN Data Link : Received Network Data In Error  CAN Data Link - Test 
247-9  SAE J1939 Data Link : Abnormal Update Rate  CAN Data Link - Test 
247-19  SAE J1939 Data Link : Received Network Data In Error  CAN Data Link - Test 
262-3  5 VDC Sensor DC Power Supply : Voltage Above Normal  Sensor Supply - Test 
262-4  5 VDC Sensor DC Power Supply : Voltage Below Normal  Sensor Supply - Test 
271-3  Fault Alarm : Voltage Above Normal  Alarm - Test 
271-5  Fault Alarm : Current Below Normal  Alarm - Test 
271-6  Fault Alarm : Current Above Normal  Alarm - Test 
287-3  Low Current Digital Output 7 : Voltage Above Normal  Window Wiper Delay - Test 
287-6  Low Current Digital Output 7 : Current Above Normal  Window Wiper Delay - Test 
288-3  Low Current Digital Output 8 : Voltage Above Normal  Window Wiper Delay - Test 
288-6  Low Current Digital Output 8 : Current Above Normal  Window Wiper Delay - Test 
374-3  Swing Brake Solenoid : Voltage Above Normal  Solenoid Valve - Test 
374-5  Swing Brake Solenoid : Current Below Normal  Solenoid Valve - Test 
374-6  Swing Brake Solenoid : Current Above Normal  Solenoid Valve - Test 
376-3  Travel Alarm : Voltage Above Normal  Alarm - Test 
376-5  Travel Alarm : Current Below Normal  Alarm - Test 
376-6  Travel Alarm : Current Above Normal  Alarm - Test 
444-3  Starter Motor Relay : Voltage Above Normal  Relay - Test 
444-5  Starter Motor Relay : Current Below Normal  Relay - Test 
444-6  Starter Motor Relay : Current Above Normal  Relay - Test 
581-3  Power Shift Solenoid : Voltage Above Normal  Solenoid Valve - Test 
581-5  Power Shift Solenoid : Current Below Normal  Solenoid Valve - Test 
581-6  Power Shift Solenoid : Current Above Normal  Solenoid Valve - Test 
586-12  Rotary Switch : Bad Device or Component  Engine Speed Control - Test 
598-3  Travel Speed Change Solenoid : Voltage Above Normal  Solenoid Valve - Test 
598-5  Travel Speed Change Solenoid : Current Below Normal  Solenoid Valve - Test 
598-6  Travel Speed Change Solenoid : Current Above Normal  Solenoid Valve - Test 
600-3  Hydraulic Oil Temperature Sensor : Voltage Above Normal  Sensor Signal (Analog, Passive) - Test 
600-4  Hydraulic Oil Temperature Sensor : Voltage Below Normal  Sensor Signal (Analog, Passive) - Test 
735-3  Heavy Lift Solenoid : Voltage Above Normal  Solenoid Valve - Test 
735-5  Heavy Lift Solenoid : Current Below Normal  Solenoid Valve - Test 
735-6  Heavy Lift Solenoid : Current Above Normal  Solenoid Valve - Test 
781-3  Chassis/Cab Lamp Relay : Voltage Above Normal  Relay - Test 
781-6  Chassis/Cab Lamp Relay : Current Above Normal  Relay - Test 
1160-3  Hydraulic Lock Solenoid : Voltage Above Normal  Solenoid Valve - Test 
1160-5  Hydraulic Lock Solenoid : Current Below Normal  Solenoid Valve - Test 
1160-6  Hydraulic Lock Solenoid : Current Above Normal  Solenoid Valve - Test 
1440-3  Throttle Actuator : Voltage Above Normal  Sensor Signal (PWM) - Test 
1440-4  Throttle Actuator : Voltage Below Normal  Sensor Signal (PW(M) - Test 
1440-8  Throttle Actuator : Abnormal Frequency, Pulse Width, or Period  Sensor Signal (PWM) - Test 
1525-3  Straight Travel Solenoid: Voltage Above Normal  Solenoid Valve - Test 
1525-5  Straight Travel Solenoid: Current Below Normal  Solenoid Valve - Test 
1525-6  Straight Travel Solenoid: Current Above Normal  Solenoid Valve - Test 
1530-3  Quick Coupler Solenoid : Voltage Above Normal  Solenoid Valve - Test 
1530-5  Quick Coupler Solenoid : Current Below Normal  Solenoid Valve - Test 
1530-6  Quick Coupler Solenoid : Current Above Normal  Solenoid Valve - Test 
1590-3  Main Pump Flow Limitation Pressure Solenoid : Voltage Above Normal  Solenoid Valve - Test 
1590-5  Main Pump Flow Limitation Pressure Solenoid : Current Below Normal  Solenoid Valve - Test 
1590-6  Main Pump Flow Limitation Pressure Solenoid : Current Above Normal  Solenoid Valve - Test 
2263-3  Right Travel Pressure Sensor : Voltage Above Normal  Sensor Signal (Analog, Active) - Test 
2263-4  Right Travel Pressure Sensor : Voltage Below Normal  Sensor Signal (Analog, Active) - Test 
2264-3  Left Travel Pressure Sensor : Voltage Above Normal  Sensor Signal (Analog, Active) - Test 
2264-4  Left Travel Pressure Sensor : Voltage Below Normal  Sensor Signal (Analog, Active) - Test 
2265-3  Hydraulic Pump #1 Outlet Pressure Sensor : Voltage Above Normal  Sensor Signal (PWM) - Test 
2265-4  Hydraulic Pump #1 Outlet Pressure Sensor : Voltage Below Normal  Sensor Signal (PWM) - Test 
2265-8  Hydraulic Pump #1 Outlet Pressure Sensor : Abnormal Frequency, Pulse Width, or Period  Sensor Signal (PWM) - Test 
2266-3  Hydraulic Pump #2 Outlet Pressure Sensor : Voltage Above Normal  Sensor Signal (PWM) - Test 
2266-4  Hydraulic Pump #2 Outlet Pressure Sensor : Voltage Below Normal  Sensor Signal (PWM) - Test 
2266-8  Hydraulic Pump #2 Outlet Pressure Sensor : Abnormal Frequency, Pulse Width, or Period  Sensor Signal (PWM) - Test 
2300-9  Switch Panel : Abnormal Update Rate  CAN Data Link - Test 
2912-3  Front Wiper Speed Control Relay : Voltage Above Normal  Relay - Test 
2912-6  Front Wiper Speed Control Relay : Current Above Normal  Relay - Test 
2913-3  Window Washer Switch : Voltage Above Normal  Switch Circuits - Test 
2913-6  Window Washer Switch : Current Above Normal  Switch Circuits - Test 
3528-3  Barometric Pressure Sensor : Voltage Above Normal  Sensor Signal (Analog, Active) - Test 
3528-4  Barometric Pressure Sensor : Voltage Below Normal  Sensor Signal (Analog, Active) - Test 
3634-3  Boom Lamp Relay : Voltage Above Normal  Relay - Test 
3634-6  Boom Lamp Relay : Current Above Normal  Relay - Test 
3798-3  Straight Travel Pressure Sensor : Voltage Above Normal  Sensor Signal (Analog, Active) - Test 
3798-4  Straight Travel Pressure Sensor : Voltage Below Normal  Sensor Signal (Analog, Active) - Test 
4785-3  Implement Pilot Oil Pressure Sensor #1 : Voltage Above Normal  Sensor Signal (Analog, Active) - Test 
4785-4  Implement Pilot Oil Pressure Sensor #1 : Voltage Below Normal  Sensor Signal (Analog, Active) - Test 
5035-3  Attachment Valve #1 Pilot Pressure Sensor : Voltage Above Normal  Sensor Signal (Analog, Active) - Test 
5035-4  Attachment Valve #1 Pilot Pressure Sensor : Voltage Below Normal  Sensor Signal (Analog, Active) - Test 
5037-3  Attachment Valve #3 Pilot Pressure Sensor : Voltage Above Normal  Sensor Signal (Analog, Active) - Test 
5037-4  Attachment Valve #3 Pilot Pressure Sensor : Voltage Below Normal  Sensor Signal (Analog, Active) - Test 
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.