3516C IMO III Petroleum Engines Caterpillar


Auxiliary Fuel Filter Housing - Install

Usage:

3516C NG3

Installation Procedure


NOTICE

Keep all parts clean from contaminants.

Contaminants may cause rapid wear and shortened component life.




    Illustration 1g06321571

  1. Use a suitable lifting device and position fuel auxiliary housing (6).The weight of fuel auxiliary housing assembly is approximately 11 kg (24 lb).

  2. Install tube assemblies (7) and (8).

  3. Install bolts (5).


    Illustration 2g06321556

  4. Connect harness assembly (4) and install bolts (2) and (3).

  5. Install hose (1).

  6. Turn On the fuel supply to the engine.

  7. Prime the fuel system. Refer to Operation and Maintenance Manual, Fuel System - Prime.
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.