Engine Oil Cooler - Assemble
Show/hide table
| NOTICE |
|---|
|
Inspect all O-rings, seals, and gaskets for wear and damage. Replace if necessary. |
- Position bonnet (12) and install 12 bolts (11).
- Repeat step 1 on the opposite side.
Show/hide table
Illustration 2 g06321251 - Install O-rings (7) and (9) and plugs (6) and (8) into oil cooler assembly (10).
Show/hide table
Illustration 3 g06321248 Show/hide table
Improper assembly of parts that are spring loaded can cause bodily injury.
To prevent possible injury, follow the established assembly procedure and wear protective equipment.
- Install bypass valve (2), spring (3), O-ring (4), and plug (5) into elbow assembly (1).
Show/hide table
| |
| Illustration 1 | g06321270 |
End By:
- Install engine oil cooler.
Caterpillar Information System:
Rework Procedure for Solar Charger Wires May be Reversed on Certain Generator Sets {1408, 7556} Rework Procedure for Solar Charger Wires May be Reversed on Certain Generator Sets {1408, 7556}
797F Tier 4 Off-Highway Truck Engine Supplement Fuel Filter (Primary) and Fuel Filter Base - Remove and Install
3516C IMO III Petroleum Engines Air Starting Motor - Remove
320D3 Excavators Engine Oil Sample - Obtain
320D3 Excavators Cooling System Coolant (ELC) - Change
C175 Tier 4 Final Engines for Caterpillar Built Machines Engine Oil Cooler - Disassemble
3500C IMO III Engines Solenoid Valve - Test - Engine
C7.1 (Mechanical) Engines for Caterpillar Built Machines Flywheel Housing - Remove and Install
320D3 and 323D3 Excavators Machine System Specifications Bucket Linkage - B1 Family
C7.1 (Mechanical) Engines for Caterpillar Built Machines Flywheel - Install
C7.1 (Mechanical) Engines for Caterpillar Built Machines Flywheel - Remove
C7.1 (Mechanical) Engines for Caterpillar Built Machines Crankcase Breather - Install
3516C IMO III Petroleum Engines Air Starting Motor - Install
New Oil Gauge is Now Used on Certain C9.3 Machine Engines {1326} New Oil Gauge is Now Used on Certain C9.3 Machine Engines {1326}
C7.1 (Mechanical) Engines for Caterpillar Built Machines Crankshaft Rear Seal - Remove
320D3 and 323D3 Excavators Machine System Specifications Main Hydraulic Pump and Mounting
320D3 and 323D3 Excavators Machine System Specifications Main Hydraulic Pump
Improved Switch Assembly for Quick Coupler Is Now Used on Certain 320, 320 GC, and 323 Excavators {1435} Improved Switch Assembly for Quick Coupler Is Now Used on Certain 320, 320 GC, and 323 Excavators {1435}
797F Tier 4 Off-Highway Truck Engine Supplement Fuel Pump (Electric) - Remove and Install - Clean Fuel Module
3516C IMO III Petroleum Engines Electronic Control Module (Engine) - Remove and Install - Primary ECM
3516C IMO III Petroleum Engines Electronic Control Module (Engine) - Remove and Install - Secondary ECM
320D3 and 323D3 Excavators Machine System Specifications Swing Drive
320D3 and 323D3 Excavators Machine System Specifications Pump Head (Main)
320D3 and 323D3 Excavators Machine System Specifications Auxiliary Hydraulic Lines